* update release version to 3.0.0
* comment out ensure-up-to-date during the release
* add release note
* clean up
* clean up links
* add release note for 3.0.0
* update release note
* update release note
* update version for gradle plugin before release
* [gradle-plugin] Initial commit
* Clarify comments on file constraints
When a user sets the models, apis, or supportingFiles environment
variables, any one of these being set disables generation for the other
two. This could be confusing to users, so I've added some clarification
text in the comments for these properties.
In addition, I've cleaned up the extension on
Property.ifNotEmpty, to avoid using Suppress annotations where it's not
necessary. The change creates a local variable of type T?, allowing
Kotlin to track the variable's nullable state at compile time.
* Move gradle plugin under modules
* Move kt files under kotlin source set. Add sample.
* [gradle] map-like options as maps
* Add tests for gradle validate task
* Apply gradle plugin to mvn install phase
* [gradle] Testing remaining gradle tasks
* Add gradle plugin to the integration doc
* Update gradle plugin README with task options
* Gradle readme formatting
* Errors in Generate/Validate print to stderr/exit 1
Generate and Validate exposed exceptions rather than user-friendly
messages when an error occurred. In generate, this could happen for
numerous reasons, but the most likely is a user typing (or guessing) an
invalid generator name. In Validate, an error was exposed if there were
any validation errors in a spec.
New behavior:
* Generate now exposes a typed exception when a generator cannot be
loaded by name. This allows consistent messaging for load failures.
* Generate now presents guidance on failure (check the spelling and try
again). This is purely a usability improvement.
* Validate now writes validation errors to stderr and exits with code 1.
* Improve err messages: config-help/required opts.
config-help now presents same error for invalid generator names as the
'generate' command.
Options which are required, and those which require a value, now present
a user-friendly hint at the error and exit with code 1 (rather than an
uncaught exception).
* Log missing -g error to stderr rather than LOGGER
* Make SwaggerCodeGen serialize subclasses properly (PHNX-859) (#1)
Motivation
----
Previously, when serializing as subclass of a property, generated swagger clients would only serialize properties of the parent class causing some values to not be pass through
Modifications
----
Before serializing attributes of a given type, we check to see if there is a specific type to be serialized so that we don't miss any properties.
* Fix improper whitespace in mustache template (PHNX-859) (#2)
Motivation
----
OpenAPI Generator upstream requested whitespace fixes (from tabs to 4 spaces)
Modifications
----
Fixed whitespace
* New: methods return the element containing the $ref if the referenced
element is not found
* Fix null check in getApiResponse(OpenAPI, String)
* Fix null check in getParameter(OpenAPI, String)
* Create 'bin/ensure-up-to-date' script
* Update shippable config
* Do no longer copy 'CI/pom.xml.shippable' to 'pom.xml'
* Fix paths in CI/pom.xml.shippable
* shippable: remove write to file
* shippable: move order
* Run 'bin/ruby-petstore.sh' to update 'samples/'
* Add Kotlin scripts to the list
The $@ option in bash doesn't make sense to come before `generate`
because the only option we can pass before generate cli usage is `help`.
System properties can be passed via JAVA_OPTS, so there's not really a
need for any intermediaries in the command line construction.
Having $@ at the end of the arguments list allows maintainers and users
inspecting options to quickly pass new options to a script. For example,
```
./bin/aspnetcore-petstore.sh --additional-properties sourceFolder=asdf
```
For command line arguments that may appear more than once in the
arguments list, this change doesn't provide any rules about overwriting
values that may exist (hard-coded) in the script. That is, in the
example above, if aspnetcore-petstore.sh already includes the
sourceFolder set to a different value, the "winning" value is up to the
options parser and openapi-generator-cli implementation.
* Fix implFolder issue with jaxrs-cxf-cdi generator
This fix is for the issue:
https://github.com/swagger-api/swagger-codegen/issues/8113
When using jaxrs-cxf-cdi and other JaxRS generators, the implFolder
config is not honored by hte generator on windows.
* jaxrs-cxf-cdi: containers with no default init
Change similar to
https://github.com/swagger-api/swagger-codegen/pull/5363/files for
jax-rs-cdi generator.
When a property that is a contained is not declared as required, it is
initialized to `null`, and not to the empty container.
This makes apio mich more easy to use, since one can differentiate when
an input list in json has been set to the empty array or simply not set.
Swashbuckle generation was missing the configuration to rename from
default swagger.json to openapi.json (expected by change in SwaggerUI's
configuration for the endpoint).
This generates to the appropriate location and updates the sample to
load the Swagger UI properly on run.
This change resolves an issue I had with opening the aspnetcore Solution (Visual Studio could not load the project). The *.sln file contained an old GUID for ASP.NET 5.
Also removed the obsolete NuGet.Config file and updated the package references to the newest versions.
* test go in travis
* test go in shippable
* upgrade stack version
* fix shippable badge
* show stack version
* install go
* set go path
* install go 1.10
* remove go installation
* remove go test
* install haskell in travis
* reenable caching in appveyor
* comment out perl test
* test docker push
* test openapi-generator-online push
* fix environment variable
* remove maven central for the time being
* only push openapi-generator-cli
* skip mvn test
* uncomment mvn install
* fix echo
* fix openapi-generator-online docker push
* better password passing
* reenable mvn verify, only push to docker for master
* fix ci status badge in readme
* revise readme
* fix badge to circleci
* remove maven central for the time being
* fix travis badge
* update travis badge image url
* fix typo in docker hub url
Previous error handling implementation had types returning
Either[CommonError, UserType], but implemented with the scala shortcut
??? which throws an exception instead. This causes compilation to fail
with a message that the expected CommonError is of type Any. This is
often fixable with generic upper bounds constraints, but this is
overkill for a placeholder implementation. Returning a temporary 'TODO'
type solves the compile error, and should allow CI to check for valid
compilation on changes.
Included in this is also a fix to support optional query parameter
types. The spec used to generate the finch server has optional query
parameters, but the version of finch in the template doesn't support
options on query parameters. Finch does, however, aggregate everything
(headers, query string, path parameters, etc) under "param" with
"paramOption" for those which are optional types.
* fix pistache c++ server in windows
* skip perl test
* comment out go tests
* Fix go test, manually fix go client
* fix rails batch file
* fix tab in java file
* install rust
* fix swift2-deprecated in windows batch file
* fix rust installation
* comment out js test
* update swift windows batch files
* update tizen batch script
* comment out ktor test
* various updates
* update pom.xml
* update ci config with new location
* Change "swagger-codegen" to "openapi-generator" in a comment
* fix pom.xml for bash client
* minor fix to github ID
* fix pom for ios
* add question and anaswer section
* add project URL to the license
* Use relative path for link between pages
* Reword some sentences, remove we/they style
* fix python flask NPE with oas3
* update perl default value, fix example value
* update android sample, fix example value
* restore x-swagger-router-controller for nodejs server generator
* update default value for bash client, fix example value, invalid tag
* update default value for objc
* update objc pestore core data
* Fixes for ze-ph:
- fixed gathering of required properties for query data model
- fixed setting of internal vendor extensions for query data model detection
- fixed small typo in generated README
* Updated samples for ze-ph fixes
* restore elixir petstore original from codegen2x
* update elixir generator to work with oas2
* minor fix to elixir generato
* minor enhancement to templates
* update elixir petstore with oas2
* update rust client with petstore oas2
* update rust with oas2 petstore, fix default value
* fix type mapping for file, update api_doc for rust client
* update rust client with oas3
* restore scalatra from codegen
* regenerate scalatra oas2 petstore, fix defaut value
* better code format for scalatra
* more format fix for scalatra
* update scalatra parameter template
* Fix missing default value of form param
* Update php sample with OAS2
* Update php sample with OAS3
* Delete quotes as default value may have integer
* Update php samples with OAS2
* use toDefaultValue() in order to apply the decoration rules of generator
* Update php samples with OAS2
* Tweak: add quotes only if example is null
* Update php sample with OAS2
* Update php sample with OAS3
* [haskell-http-client] fix codegen issues
* ensure datatypeWithEnum is set on codegenParameter when is enum
* [haskell-http-client] fix isAlias + arrayModelType missing "datatype"
* [haskell-http-client] param.isListContainer is sometimes false for list types
* [haskell-http-client] gen MimeNoContent instances automatically
* [haskell-http-client] fix example-app and integration tests
* [haskell-http-client] update docs
* Added vendorExtensions.x-isPrimitive. (#7991)
* Added vendorExtensions.x-isPrimitive.
Switch template for constructFromObject.
* Reflect review indication.
* [typescript-angular] AOT-compatible API client (via ng-packagr and ngc) (#7984)
* typescript-angular: uses ng-packagr for the build
see https://github.com/swagger-api/swagger-codegen/issues/6722
see https://github.com/swagger-api/swagger-codegen/pull/6735/
* this should make everybody happy: Angular 2/4/5 AOT support
- uses ngc when targeting Angular 2 (as seen in https://github.com/swagger-api/swagger-codegen/pull/6735)
- uses ng-packagr 1 when targeting Angular 4
- uses ng-packagr 2 when targeting Angular 5
* removes bogus import
* cleans / updates Petstore samples, adds a new sample for Angular 5
* typo in README
* fixes broken travis build. adds pom.xml files again
This reverts commit 471d248a2e9b5d8eed10c71644c222c053e007b0.
* makes usage of `dist` more clear
and i feel generally better when `npm run build` is called explicitly.
- for ng-packagr 2 is doesn't matter, since the final package.json does not have any scripts
- for old ng-packagr 1 it matters, scripts are copied to the final package.json which breaks installation via `npm install {{npmName}} --save` (it runs `npm run build` again)
* typescript-angular: small improvements as suggested by @macjohnny
* angular-typescript: updated petstore samples, 3rd try
* Issue 5542, always generate pom and readme (#7977)
* Issue 5542, generate pom.xml with separate parameter. InterfaceOnly=true for not generating pom.xml not works in every situation.
* Issue 5542, generate pom.xml with separate parameter. InterfaceOnly=true for not generating pom.xml not works in every situation.
* Issue #5542 Always generate pom.xml and README.md
* [TypeScript][Angular] fix date path parameters (#7476, #7302) (#7479)
* #7476, #7302: [TypeScript][Angular] fix date path parameters, fix path parameters with :.+ in it
* #7476, #7302: [TypeScript][Angular] fix date path parameters, fix path parameters with :.+ in it
* #7476, #7302: [TypeScript][Angular] fix date path parameters, fix path parameters with :.+ in it
* #7476: generate samples
* code cleanup
* #7476: improve variable description
* #7302: revert character skipping, since it will now have the same parameter name in the method signature and in the api path
* #7302: generate samples
* typescript-angular: added Interfaces to api exports if withInterfaces is selected (#7975)
* added Interfaces to api exports if withInterfaces is selected
* removed import of interface classes
* added gererated petstore example api.ts
* Fix Issue 8014
* Adapted to work with Angular2 Http and Angular 4.3+ HttpClient
* removed unnecessary (others) for ng HttpClient from Interface
* Golang Client Refactor (body and model in errors, typed optional parameters) (#7987)
* Return abstracted errors with model data if available.
* update tests with error models.
* Return error models on the abstract type.
* dont leak FH
* duplicate of PR #7752 for issue #7511
* Change optional parameters to structs.
* update documentation
* fix circleCI failure
* [typescript][angular] query parameter with null value should not be set (#8033)
* #7893: [typescript][angular] fix optional query parameter null value
* #7893: [typescript][angular] generate samples
* #7893: [typescript][angular] generate samples
* Version rest-assured has been updated to 3.1.0 (#8052)
* [Dart] Fixes TypeError in Dart 2 mode (#7959)
* Properly convert lists to dart types
* Updated sample petstore client
* Fixed maps in Dart strong mode
Fixed list parsing for null-elements
* change parseDate in es6/APIClient (#7973)
* [PHP] Improve duplicated validation logic (#7954)
* Improve duplicated validation logic
* Update the samples
* Update php client with OAS3
* Fix content type
the endpoint consumes 'application/x-www-form-urlencoded'
* Regenerate php client from OAS3
* Update the test case according to the fix on spec
* Update php client with petstore OpenAPI v2 spec
bin/php-petstore.sh
* Change order of arguments according to the changes that auto-generated codes
* Fix 'FakeHttpClient not found' error
It has occured when run the test case separately like below.
"vendor/bin/phpunit tests/RequestTest.php"
* Update assertion according to a change on spec
* Update assertion
* restore pistache from codegen 2.x
* update pistache samples with oas2
* update pistache with oas3 petstore (no diff)
* restore datatype for array of model
* update pisache server scripts
* Revert "restore datatype for array of model"
This reverts commit 3b949a3873f3fca78311065173eda26e786dedec.
* fix array of models in method signature
* Handle java boolean getter at codegen level instead of template.
* {{#isBoolean}}is{{/isBoolean}}{{getter}} is no longer necessary in templates.
* Use 'toBooleanGetter' instead of replace in PhpSymfonyServerCodegen
* restore go server petstore from codegen 2x
* update go server petstore (oas2) - no diff
* update go server samples (oas3)
* add go petstore server script
* update dynamic-html samples with oas2
* update dynamic-html oas3 (no change)
* update html petstore (oas2)
* update html petstore with oas3
* fix example value for form parameters
* fix javadoc string
* Fix for arrays in requestBody
* Map description from RequestBody in CodegenParameter
* Fix missing import of model class with nested arrays in response
* Fix imports, consistent 'baseType'
* Add tests for enum
* update objc petstore with oas2, fix default value for parameter
* update objc petstore with oas3 spec
* update objc core data oas2
* update objc petstore with oas3
* update nodejs server oas2
* update nodejs server petstore with oas3
* update nodejs google cloud with oas2 petstore
* update nodejs server google function with oas3
* Create unit test to control regressions
* Change HIDE_GENERATION_TIMESTAMP handling
* Add new test case: set values with the setters
* Add 'isHideGenerationTimestamp()' getter
* Add property 'supportAsync' to allow the use of CompletionStage of java8
* Add support for completionStage in play-framework templates
* Add script to generate samples for play-framework async controllers
* Add generated samples for java play framework with asynchronous controllers
* Add missing templates and generate samples
* Remove useless comments from generated samples in play framework async
* Fix ControllerImp template for java play framework
* Add script for java play framework async to general script
* Regenerate java play framework server samples
* Fix missing whitespace
* Fix unnecessary blank lines at imports
* Fix tabulation issue
* Fix tabulation issue in controllers
* Remove blanks from api Imp
* Remove more empty lines
* Add blank between methods
* Remove blanks before call to service method
* Fix some tabulations in java play async templates
* Regenerate samples for java play async
* Mark `not required` swagger properties as optional typescript properties
Properties that aren't required in the swagger contract should be marked as optional typescript properties, i.e. with `?` after their name when they are defined.
* Adding Petstore samples files generated with the optional property change
The commas are invalid syntax and create the error:
```
A problem occurred evaluating project ':client'.
> Could not get unknown property 'testCompile' for object of type org.gradle.api.internal.artifacts.dsl.dependencies.DefaultDependencyHandler.
```
* add valid for pojos #4738
* add Valid to imports for pojos #4738
* Do not generate Valid-annotation for Date-types and UUID
* * add Valid-annotation to Containers. #4738
Collection-valued, array-valued and generally Iterable fields and properties may also be decorated with the @Valid annotation. This causes the contents of the iterator to be validated.
Quoted from: http://beanvalidation.org/1.1/spec/
* add equivalent windows-bat-script for jaxrs-cxf-petstore-server.sh
* differences on jaxrs-cxf-generated-classes introduced by other changes (not related to this PR)
* Add constant with API version
* Use semver::Version for ApiVersion
* Go back to API version as a string
* Rust composite services
* Actually use the version from the swagger file
* Add typescript-inversify language
* Add windows script
Add windows script
* Use rxjs instead of rx and encoding only the value of URL parameters
* Remove lodash dependency
Remove lodash dependency
* Readd linux user detail on run-docker script
* Solve import problems
* Remove configuration template
* Add usePromise config's variable
* Align Test to check usePromise config parameter
* Add possibility to receive all the httpResponse
* Better ts-lint on api service
* Update sample client example with new ts-lint
* Update petstore sample with new ts-lint
* [Rust] Implement minimal auth support
This is pretty much the bare minimum needed to get v2 auth working.
This is partly based on the Go implementation.
* [Rust] properly format query string
* [Rust] Improve auth formatting
* [Rust] Regenerate petstore sample
* End use of deprecated openssl method
* Enhance rust-server to use hyper 0.11 to support handling operations asynchronously
The changes are complete and working (at least for microservices tested within Metaswitch). This isn't completely compatible with the (previous/current) synchronous swagger-codegen. Specifically,
* `Client` is no longer `Send + Sync`
* Api implementations used by Server are no longer expected to be `Send + Sync` (which is good, because it's quite hard if `Client` isn't)
* the code to create `Client`s and `Server`s, and hook them into `hyper` or `tokio` is different.
Importantly, though, the business logic itself should be unchanged.
* Re-adds the `basePath` element to all server endpoints. This mean clients and servers can talk to each other again.
* Fix multipart formdata codegen
* Fix up handling of multipart messages
* Fix server -> client multipart message response
* Correct handling of optional file types
* Add authorization header to requests with basic auth
* Add client support for `application/x-www-form-urlencoded`
* Import uuid library if headers use UUID type
* Add BASE_PATH to the server module.
* Wrap client connector
* Support both query and body parameters on the same operation
Prefix path to `inputSpec` with maven's `${project.basedir}`. The codegen-maven-plugin will look inside the current working directory so whether a relative path works or not is depending on where the maven build is invoked from. Using `${project.basedir}` makes the path absolute.
* Small fixes to prevent crash when empty json body is provided.
* Add deleteLater wrapper for pointers passed to user code to prevent memory leak.
* Updates to move Object Wrapper to separate file
* Add Prefix to class name
* Improve JMeter Template:
In CSV DataSet ignore first line as it contains headers
Share CSV for Thread-Group instead of doing it across all threads
Use scheduler
Add variables definable through properties for:
- Rampup
- Duration
- Threads
Drop HttpClient 3.1 customization
Remove in Test Plan Element host and port as they are defined in User
Variables
* Improve JMeter Template : Fix Issue 7773
This comment #7773
As per request update samples
* Small fixes to prevent crash when empty json body is provided.
* cpprest : Add toJson and toHttpContent array support.
* petstore : Run script.
* cpprest : Fix toHttpContent function header.
* petstore : Run script.
* cpprest : Add support for primitive response without enclosing item.
* cpprest : Fix spaces.
* cpprest : Fix build if bodyParam is optional.
* cpprest : Fix vector of vector param.
* Small updates to use utf encoding
Add * operator for ^required
* fix typo
* use URLComponents instead of NSURLComponents
* add encode method for any type
* Add public initializer for modelObject
* change id to _id
* fix APIHelper funcs for array query parameters
* make public to write unit test
* add APIHelperTests
* fix typo
* fix regression
* Check date value before calling to_iso8601
When deserializing a date value the value has to be a string when
calling to_iso8601. Otherwise it fails with a match error due to a
is_binary() guard.
* Fix: to_iso returns tuple with three values.
* Small fixes to prevent crash when empty json body is provided.
* Fix some more memory Leaks in the model-body
- Members not deleted in cleanup() method, for maps/arrays of primitive types.
- Avoid undefined behavior when updating class members with data from missing json fields
* Add overloaded method to take an InputStream for the request body, and fix a bug with collections
* Use fully qualified name for InputStream to avoid potential conflicts
* Add support for Input Stream choosing content type, and fix a bug
* Ensure GET requests send an empty request body!
* Improve: update sample tests automatically
* security test
* Update sample
- bin/php-petstore.sh
- bin/security/php-petstore.sh
The security test has not been updated for a while.
* Small fixes to prevent crash when empty json body is provided.
* WIP: plug mem-leaks
* fixup: add the QJsonObject instance in toJsonArray instead of pointer
* fixup: simplify toJsonMap
Actually the original solution is incomplete, because "innerType" maps to a single C++ type. Have a look at Qt's builtin QJsonObject::fromVariantMap.
* Updates to antis81:patch-1 after tests.
* update to remove string allocation
* Updates due to address of members being passed
* Update PetStore Examples
* Small updates for Header includes
* Add path & file separator (/) to return the correct path
Add the separator between the tempFolderPath and the sanitized filename so that the path to the file is correct.
(Fixes#7670)
* Remove separator from generated file
* Add separator
Add the separator between the tempFolderPath and the sanitized filename so that the path to the file is correct.
(Fixes#7670)
* Update sample code
Via ./bin/php-petstore.sh
The following schema definitions kinds are now supported:
MyStringArray:
type: array
items:
type: string
MyObjectArray:
type: array
items:
type: MyObject
* Added genericModelSubstitutes if using Optional
As per https://github.com/springfox/springfox/issues/1848 Doesn't seem to fix the problem, but is what springfox recommends so might be aprt of it.
* Added config package to scans
If you have defined apiPackage and basepackage (e.g. as com.example.api) but not defined configPackage then config is still in io.swagger.config and is not included in the component scan. This means the config is not used when generating the swagger definition from the code. Fixed by including configPackage also in the scan.
* Ran spring-all-pestore.sh update script
* Converted tabs to spaces
* Ran spring-all-pestore.sh update script
* [Java][retrofit2] Fix for issue #7446: file upload sets filename as baseName instead of a dynamic filename. The solution is to use okhttp3.MultipartBody.Part instead of RequestBody in formParams template.
* Changes corresponding to review comments
* Petstore Samples
* Fixed tests
* Ada generator generates "=>" (correct syntax) instead of "->". Fixes#7450
* Updated the Ada petstore samples
* Committing "VERSION" file and the rest of the petstore samples
* Changed default project name and package name for Ada, not to have circular dependencies between gpr files.
* Ada code generator now adds x-is-model-type every time a model is defined locally in the YML file.
Fix#7569.
* Regenerate PetApiTest, OrderTest
The same test code as deleted is in the 'tests' directory.
* Move test code 'test' -> 'tests', and Regenerate test/Model/PetTest.php
* Regenerate 'test' directory
rm -rf samples/client/petstore/php/SwaggerClient-php/test && bin/php-petstore.sh
Previously if the type was "myEnum" it would be written as
```
type myEnum string
const (
DEMO MyEnum = "DEMO"
)
```
which would fail because of the capitalization difference. This fixes that.
* Replacing calls to dataTaskWithRequest:completionHandler:
In objc ApiClient-body.mustache, replacing calls to AFNetworking's deprecated `dataTaskWithRequest:completionHandler:` with calls to `dataTaskWithRequest:uploadProgress:downloadProgress:completionHandler:`.
* Ran the shell script under ./bin/ to update Petstore sample so that CIs can verify the change: ./bin/objc-petstore.sh and ./bin/security/objc-petstore.sh
* fix issue-7453; make jersey 2 generated code thread safe by following the withHttpInfo pattern used by many other generated clients
* fix issue-7453; make jersey 2 generated code thread safe by following the withHttpInfo pattern used by many other generated clients
* Added support for application/xml content-type for GO language
Issue #7463
* Added test scripts for Go lang "withXml" feature
* Added samples for Go land "withXml" feature.
* "withXml" feature for Go language is only available for client.
* [csharp] ctor params should always be camelCase
After PR #6305, var names defaulted to PascalCase results in constructor
arguments also being PacalCase. Model properties and constructor
arguments have no reason to be the same case, and in fact may cause
issues (`name = name` will result in a compilation error).
This commit forces all constructor params in models to lowerCase.
This is a necessary change, for instance, if client SDK consumers assign
using named args:
var a = new Model(first = "", second = "")
The PacalCase default and update to constructor arg casing will break
existing consumers of the client.
See #7070 for more details and discussion.
* [csharp] Regenerate samples
* [csharp] Remove client models generated from a different spec.
* [csharp] Escape reserved words on camelcase/lowercase lambdas
* [csharp] Regenerate samples
* Fix the GNAT project for the client and server to avoid using unecessary projects on
the client side
* Define a minimal configuration for user and application definition
* Fix the server skeleton to emit the response only when the status code is 200
* Fix the Ada petstore GNAT project
* fixing "decoding Unicode is not supported" error for py2 when data is unicode
* allowing nonstandard methods for tornado python client.
* Making sure to return unicode when needed
* Ada generator generates "=>" (correct syntax) instead of "->". Fixes#7450
* Updated the Ada petstore samples
* Committing "VERSION" file and the rest of the petstore samples
* Changed default project name and package name for Ada, not to have circular dependencies between gpr files.
Using the option `taggedUnions` will create a union type for each parent
type instead of extending interfaces. The union types are tagged by using
the discriminator values.
And also:
* Add support for aliases;
* Add support for read-only properties.
* Fixed data type for optional parameters in delegate
When generating using the delegatePattern and including an optional parameter, the api used a type of Optional<T> while the delegate used just T. This resulted in a java error in the generated code wen trying to call one from the other.
Fixed by using correct data type in delegate
Fix#7179
* Updated samples using supplied (Windows) scripts
* Revert "Updated samples using supplied (Windows) scripts"
This reverts commit 58b9c618085ac4201cfb011def96e14caaaff3f8.
* Rest-assured http client has been added
ApiClient has been added
@Deprecated has been added for operation
{{{returnType}}} has been fixed
build.gradle.mustache, build.sbt.mustache, api_doc_mustache has been added
Samples has been added for rest-assured
Useless supporting files has been removed for rest-assured
Sample has been added for rest-assured
* Tests has been added
* Doc and tests has been fixed, JSON.mustache moved to common
* Issue 7440 Added support for returning response in jaxrs-spec interfaces.
* Issue-7386 Updates samples for jaxrs-spec interfaces introduced in issue 7386.
- add new config options:
cabalPackage
Set the cabal package name, which consists of one or more alphanumeric words separated by hyphens
cabalVersion
Set the cabal version number, consisting of a sequence of one or more integers separated by dots
baseModule
Set the base module namespace
requestType
Set the name of the type used to generate requests
configType
Set the name of the type used for configuration
* Fix calling the 'Call' procedure to submit the request for the Ada client when a request
has form parameters
* Rebuild the files by running bin/ada-petstore.sh
* Ada generator generates "=>" (correct syntax) instead of "->". Fixes#7450
* Updated the Ada petstore samples
* Committing "VERSION" file and the rest of the petstore samples
* Redone the algorithm to sort the models by their dependencies, to create correct *-model.ads files.
To fix#7485
* changed tabs into spaces
* [tools] Make sed in new.sh more cross-platform
The -r option passed to sed is a GNU sed option for extended regex
evaluation. The -E option evaluates the same option, and is part of the
POSIX standard, meaning this option is available in GNU sed as well as
Apple's BSD variant.
This commit removes the need for users to install gnu-sed on Mac.
* [ktor] Initial ktor (kotlin-server)
This adds a very barebones implementation for a ktor server generator.
This supports metrics and typed locations. All endpoins are stubbed to
return HTTP/1.1 501 Not Implemented.
* [ktor] Initial sample
* [ktor] Adding options for select feature installs
Options available:
* featureAutoHead
* featureConditionalHeaders
* featureHSTS
* featureCORS
* featureCompression
* [ktor] Start of auth functionality
* [ktor] API key auth placeholder
* Add basic support for oauth2 configurations
ktor doesn't seem to explicitly accept oauth flow properties in its
configuration object. This may be a blocker for 'implicit' flow
definitions.
* Added example response objects
* [ktor] Route for apis with bodies, some cleanup
ktor locations are only supported for routes with path/query parameters.
Routes with body or file parameters must be declared with traditional
route api.
This commit also includes lambdas for simplifying processing in
library-based server generator code. As an example, ktor requires
lowercase http methods while spring (a potential future generator)
would require an uppercase such as HttpMethod.GET. It doesn't make sense
to modify these in the operations post-process method because that
format wouldn't be universally desirable.
The lambdas included in the KotlinServerCodegen:
* lowercase: converts all text to lowercase
* uppercase: converts all text to UPPERCASE
* titlecase: converts words (with configurable delim) to Title Case
* indented|indented_8|indented_12|indented_16: these helpers apply the
same desired indent to all lines of an included fragment's text.
* Fix some javadoc issues in lambda classes
* Update kotlin-server-petstore.bat
Change `kotlin` to `kotlin-server`
* Fix javadoc error messages in CI
* add luarocks spec
* remove trailing spaces
* remove rockspec filename option
* update lua rockspec
* update rockspec based on feedback
* remove configuration which is not needed
* remove api_client, which is no longer needed
* Build sample prior to code changes so differences are easier to decipher
* Add byte array type adapter for okhttp-gson (java8 only)
* Unit revealed that Gson (or GsonFire) defaults to escape = (equal sign) out of base64 string. Add disableHtmlEscaping() to gsonbuilder.
* Update specs and samples to include format=byte and include junit test of byte array serialization and deserialization.
* Implement recommendations by @cbornet including: Use okio.ByteString for base64 conversions instead of java 8 lib since the okhttp-gson client already includes okio. Remove setting to disableHtmlEscaping. Rename LocalByteArrayAdapter to ByteArrayAdapter.
* Update spec and sample for java okhttp-gson library client
* Undo addition of profilePhoto property. A format byte property is already available under the format_test definition.
* Put previously deleted tests back. Modified testFindPetsByTags() to verify exception since the server now returns a 500 for this request.
* Update test to pass when run against docker containerized server swaggerapi/petstore (heads up, this test fails if calling out to the internet published version of http://petstore.swagger.io)
* Split up model template into partials
* Change models from class to struct.
This fixes issue https://github.com/swagger-api/swagger-codegen/issues/6941.
In this change, we make our Swift4 generated model objects struct instead of class. However, in order to do this, we needed to handle the following edge cases:
* Inheritance and polymorphism (allOf)
* With classes, we use inheritance. So therefore, the parent properties are ONLY on the parent generated class, and the model object which derives from the parent class picks up those properties through inheritance.
* However, structs do not support inheritance. So we simply duplicate the parent allOf properties in the child struct.
* We have to handle the case where the property name on the struct may be different than the property name in the JSON. By default, the Codable protocol assumes that the JSON property name is the same as the struct property name. If they need to be different, then we generate a CodingKeys string enum, which contains the mapping between struct property name and JSON property name.
* additionalProperties. We cannot use the default Codable implementation for the additionalProperties, since it will look for an actual dictionary called "additionalProperties" in the JSON. Therefore, for model objects which have additionalProperties, we must generate our own implementation for the Decodable and Encodable protocols.
I have run ./bin/swift4-all.sh and ./bin/swift4-test.sh to re-generate all of the sources, and I have verified that the generated code in samples/clients/test/swift4/default builds and the unit tests pass.
* Update VERSION in .swagger-codegen
* Update generated code for swift4-test schema
* #7365: use enums string / number literals for request parameter if it is an enum
* #7365: use enums string / number literals for request parameter if it is an enum
* #7365: use enums string / number literals for request parameter if it is an enum
* #7365: improve docs
* #7365: move code to AbstractTypeScriptClientCodegen, remove redundant code in TypeScriptAngularClientCodegen, change type Object to Number in numericEnumValuesToEnumTypeUnion()
* #7365: move code to AbstractTypeScriptClientCodegen, remove redundant code in TypeScriptAngularClientCodegen, change type Object to Number in numericEnumValuesToEnumTypeUnion()
* #7365: allow parameter data type customizations
* #7365: re-enable disabled unit test assertions
* #7365: remove enum handling from type declaration generation
* #7365: generate all typescript samples
* #7365: re-enable disabled unit test assertion
* copy mustache templates from dart generator
* Start with generator by copying the DartClientCodegen for now
* at least we know this is not for a browser..
* First working version for a simple swagger configuration
* remove browserClient parameter, since it doesn't make sense for flutter
* Take care of complex types to support object hierarchies
* add null safety
* add small test for options
* add flutter-petstore scripts
* generate flutter petstore output
* Add new flutter test project
* move generated client to make it usable
* use generated swagger petstore plugin
* add support for lists of objects
* add DateTime support
* fix listFromJson implementation
* fix NPEs in DateTime operations + place order in sample
* Small readme changes
* bugfixes
* Use flutter-compatible implementation as default dart implementation
* fix generated samples
* Make lists serializable, now all dart test cases are working again
* better list implementation
* use StringBuffer
* removed FlutterClientCodegen
* fix browser client
* fix dependencies
* swagger-browser-client for browserClient testcases
* fix scripts
* removed flutter scripts
* add map support and simplify code via using .toJson contract
* remove unneeded devDependencies
* Regenerated samples
* fix call to mapFromJson, it is not a constructor
* remove pointless string serialization
* regenerated dart samples
* update for ze-ph generator stub to support Zend Expressive 2.1 and Path Handler 0.3
* ze-ph: for each operation generator creates special DTO model from its query parameters
* ze-ph: generation of extra TODO's for complex container type and update for samples
* Ada generator generates "=>" (correct syntax) instead of "->". Fixes#7450
* Updated the Ada petstore samples
* Committing "VERSION" file and the rest of the petstore samples
* [csharp] Support composition on toJson
Previous implementation assumed specification only supports polymorphic
associations (via discrimator), although the code didn't seem to be
setup correctly for that in the first place. That is, the parent object
must define the discriminator (see
https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#models-with-polymorphism-support),
so NOT HAS parent AND HAS discriminator doesn't make sense.
From a C# perspective, base classes should have the method marked
virtual and derived classes should override the method. This supports
both composition and polymorphic definitions.
* [csharp] this.Configuration in api template
Unprefixed Configuration property access leads to ambiguous references
when spec defines a Configuration model.
* [csharp] Models/properties support nested arrays
Previous implementation didn't support multiple levels of array with
array items as OpenAPI spec supports. This means an object defined as
type: array with items = type: array|items=double (which is common in
GIS) would not be possible.
This implementation assumes generics in the nested type definitions, so
the above would generate List<List<double?>> for model parent types as
well as property type declarations.
* [csharp] Regenerate integration test sample
* [csharp] Set "Client" case sensitive as reserved
* [csharp] Regenerate security sample
* [csharp] Regenerate samples
* [csharp] Support composition on toJson
Previous implementation assumed specification only supports polymorphic
associations (via discrimator), although the code didn't seem to be
setup correctly for that in the first place. That is, the parent object
must define the discriminator (see
https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#models-with-polymorphism-support),
so NOT HAS parent AND HAS discriminator doesn't make sense.
From a C# perspective, base classes should have the method marked
virtual and derived classes should override the method. This supports
both composition and polymorphic definitions.
* [csharp] Regenerate integration test files
* [csharp] Regenerate samples
* [csharp] Regenerate security sample
* [csharp] this.Configuration in api template
Unprefixed Configuration property access leads to ambiguous references
when spec defines a Configuration model.
* [csharp] Regenerate samples
* Fix the comparison between two model types to compare them recursively
and make sure we sort the model types according to their dependencies
* Run bin/ada-petstore.sh to update the generated Ada client samples
* Fix Ada client generated code to avoid having a spurious body name for parameters passed in the body
* Run bin/ada-petstore.sh to update the generated Ada client samples
* [erlang-client] fix body param from being included path and base path to remove host
* [erlang-client] move request logic out of api functions to utils module
* [erlang-client] add support for passing http client configuration to requests
* [erlang-client] update auth handling
* [erlang-client] remove underscore2, replacing with original underscore + replaceAll
* Add default value and required parameter support to vertx server templates. Fix for #7409.
* Added missing serviceId declaration to workaround #allParams section clearing the vendorExtensions map
* [Rust] Consider error statuscodes to be errors
* [Rust] Introduce 'ApiError' type for 4xx/5xx resp
This updates the previous commit which added an 'ErrorStatus' variant to
an 'ApiError' variant.
It does not specialize the error to the specific possible error
responses yet, rather returning a 'serde_json::Value' for any case.
This will lose any error messages which cannot be parsed as json and
instead return a json-parse error.
A future change should update the generated signatures such that the
returned future's error type is specialized to the specific errors that
may be returned by that api (and possibly a catchall json::Value still).
* [Rust] Regenerate petstore samples
* [Rust] Add error example to petstore sample
* [Java] #3024 - Add build-helper-maven-plugin version to retrofit client template
* [Java] #3024 - Add build-helper-maven-plugin version to feign client template
* [Java] #3024 - Add build-helper-maven-plugin version to jersey client template
* [Java] #3024 - Add build-helper-maven-plugin version to resteasy client template
* Updated the version of Scalatra to the latest (2.6.2)
- Updated Scalatra 2.6.2 (latest)
- Updated Scala 2.12.4
- Updated sbt 1.1.0
- Reduced dependent artifacts to a minimum
- Cleaned up build.sbt
- Changed the package name from client to server
- Set log output (logback)
- Updated web.xml for servlet 3.1
* rename package 'com.wordnik' -> 'io.swagger'
* Added rolling file appender to logback.xml
* Disable creation of empty json fields and fields for primitives which were not set, but using default values
modelnamePrefix will be the one passed from command line or SWG if none
* Updates after review
Also common http files are splitted
Update Petstore examples
* Small Fixes for cleaning up arrays of arrays/maps
* Changes
- Api Body pass by Reference, avoid seg fault due to deletion of auto constructed object passed as parameter.
- Support Maps and Arrays upto a depth of 2
- Refactor Helpers to handle Maps and simplify code
* Remove size check due to possible incorrect type
* Update PetStore Examples for Qt5 C++ and small fixes for QDate/QDateTime
* Updates after review. Fixes typo and remove usage of auto keyword.
* Restored usage of auto keyword.
* Regenerate test/UserApiTest.php
The same implementation as testLoginUser() is in tests/UserApiTest.php
* Delete test/Client/ObjectSerializerTest.php
The same implementation is in tests/ObjectSerializerTest.php
* Update Petstore sample
- bin/php-petstore.sh
- bin/security/php-petstore.sh
* #7359 Fix - use reflection to instantiate non-generated class (#7360)
* add tests for java vertx petstore
* add swagger example to README.md (#7368)
* Fix assignment of new object instance to variable
Fixes `Error in foobar$fromJSONString(s) : object 'CategoryObject' not found`
Discussion in https://github.com/swagger-api/swagger-codegen/issues/6520#issuecomment-357132746 ,
thanks @wing328 for encouraging.
* [scala] Escape reserved words, support Array[Byte]
Previously, Array[Byte] was compiling to ArrayByte. This provides a type
mapping to output the correct type.
This also escapes reserved words with grave accents, as is most common
in Scala. Escaping with an underscore prefix breaks serialization (in
Jackson, for example) unless templates are modified manually. Escaping
using grave accent should unblock most serializers from requiring
template modifications.
* [scala] Regenerate integration test outputs
* [scala] Regenerate samples
* [scala] Remove unused imports in related codegen files
* [Scala] Fix async helper methods when body is optional (#7274)
* [Scala] Fix async helper methods when body is optional
Closes#7272
* Update petstore sample
* Standardize all isRestfulxxx methods.
Change 'equals' method to 'equalsIgnoreCase' for isRestfulIndex method in Operations. This matches isRestfulCreate, isRestfulShow, isRestfulDestroy
* [scala] Fix default values in scala client
This uses consistent logic for optional types with default values in the
scala client. Also, uses Option(default) instead of Some(default) to
guard against people defining defaultValue = null. Option(null) becomes
None while Some(null) defines a null value explicitly and will break
maplike operations.
* [scala] Regenerate client sample
* [scala] Add missing json4s import, which will be added by another PR but allows current samples to generate
* [scala] Include integration tests for required attributes support
* [scala] Support string types with formats
This adds support for better support of type=string and
format={date,date-time,binary,byte}. Previously, binary and byte were
inconsistently defined as strings rather than byte arrays, while
date/date-time were parsing default values into formats that did not
match OpenAPI/Swagger 2.0 specifications for full-date and date-time.
We may want to consider pulling in json4s-ext to support wider date
formats and moving to date=LocalDate and date-time=ZonedDateTime.
This will have breaking changes for consumers expecting binary/byte to
be strings rather than byte arrays.
* [scala] Unique parameter names in integration test, to avoid seemingly conflicting names
* [scala] Regenerate client sample
* Sort file listings in AssertFile.java
Per File#list() javadocs:
There is no guarantee that the name strings in the resulting array
will appear in any specific order; they are not, in particular,
guaranteed to appear in alphabetical order.
I'm unable to repro directory listing failures on OS X High Sierra or
Ubuntu 16.04 under Parallels, so it's not clear to me if listing order
is indeterminate per-platform or the behavior is just not defined and
up to the platform's installed runtime. Sorting the array of strings
prior to comparison should resolve this issue on every platform/runtime.
* [scala] exclude api tests for integration test gen script
Script should match options in the integration test class
* [scala] Temporarily disable client integration tests
CI doesn't seem to pick up template changes in integration tests.
Disabling scala client integration tests, pending investigation of the
issue.
* [scala] Remove redundant json4s import
* [scala] Regenerate integration test
* [scala] Regenerate sample
Rustfmt is widely accepted in the rust community. The actual style it
enforces is not completely stable, but running a reasonably recent
rustfmt and reading the short rfc-based style guide seems better than
nothing by a long shot.
* Initialize router in init method and re-use router member to create SwaggerRouter
* Added generated samples for 7320 fix
* Fixed alignment to 4 spaces for 7320 fix
* Make stripPackage name configurable via property
- Needed because some APIs (e.g. Kubernetes) include version information in packages. Stripping causes many generated API and model classes to be named the same, causing a last-one-wins situation which is unacceptable.
* Per PR review, ensure stripPackageName Boolean property and log warning
* Add Ada client petstore samples
- Add script to generate Ada client support with swagger-codegen
- Add files to build the Ada sample
- Add main program to use the generated client samples API
and connect to the server to perform some operations
* Add some description for the samples
* Update the documentation to explain how to build, how to use the generated Ada client code
* Add server support for path parameters
- Update postProcessOperations to scan each path parameter and emit a x-path-index
vendor attribute to tell the index of the path parameter
* Add and fix Ada server code package declaration
- fix declaration of operations
- generate a generic package that must be instantiated with the target server implementation
and which provides the skeleton (deserialization and serialization of data)
* Implement the Ada server side operations
- extract body, query parameters, path parameters
- serialize the result
- register operations to the server according to the path/routes
* Update the code generation to generate server Ada implementation code
* Improvement of Ada server support: generate the swagger.json template file
* Define toModelName operation to the creation of a model identifier
* Add support for server permission generation
- collect the security scopes in postProcessAuthMethod() method and make sure
these scopes have unique identifiers. Some scopes correspond to URLs
but others correspond to pseudo identifiers.
* Use the #lambdaAdaComment filter to indent correctly a multi-line description
* Fix model generation to support arrays
* Update the generated GNAT project file
* Refactoring and improvement of server code generation
- Change the server generated code to pass a Context_Type object
to allow the server implementation to get/set headers in the request/response
and control what is put in some responses
- Generate the security permissions based on the scopes that have been collected
* Server code generation improvement
- Fix generation of GNAT project
- Generate the intermediate Ada packages if necessary
- Generate the server main
* Ada server main template
* Ada server code improvement
- Add support to generate server permission verification
- Fix the GNAT project definition
- Templates for Ada intermediate packages
* Skeleton for the server side implementation
* Generate an empty Ada server implementation
* Templates for the Ada server implementation
* Add a README.md file and a GNAT config.gpr file
* New templates to document the generated Ada server
* Add server configuration file for the Ada server
* Fix the log message in the Ada server to report the correct URI to connect to
* Generate the Ada server configuration file
* Improvement of Ada code model to support nullable types
* Update the Ada server templates
* Refactor the Ada code generator
- separate the Ada client and Ada server code generators
- register the Ada server code generator under the name 'ada-server'
keep 'ada' for the client Ada code generator
- moved the common Ada code operation supports to the AbstractAdaCodegen
* Improvement and cleanup of Ada client and server code
- new template for the client main program
- fix the GNAT project template for client or server programs
- remove unused options to better use the --model-package option
* Fix the GNAT project file name to use a lower case name
Fix the default GNAT config
Fix the headers of intermediate Ada package files
* Regenerate the model and client Ada files
* Update the Ada client sample to take into account the Nullable types
* Regenerate some files with Ada Swagger Codegen
* Ignore generation of petstore.gpr
* Disable creation of empty json fields and fields for primitives which were not set, but using default values
modelnamePrefix will be the one passed from command line or SWG if none
* Updates after review
Also common http files are splitted
Update Petstore examples
* Initial commit, Generates everything necessary to run a performnace test against a swagger api. Just have to fill out the CSV feeder files with your data.
* adding samples and gatling-petstore.sh file
* Extending the AbstractScalaCodeGen
* Checking in the CodegenConfig file as it is needed to generate
* removing escaped reserved words
* Changed model to be able to make all variables utilize an underscore while json fields are still just the variable name
* Changing underscore to var as interpolation can not start with a _ in scala
* Fixing path params
* allow you to pass in a system property to define which config to use as a workload profile, use rate and instance multipliers to scale up and down your test, added ramp down after the test is completed, added global assertions.
* Addressing PR feedback
* missed semi-colon
* Bringing everything up to date with the renames that were suggested
* [haskell-http-client] handle */* mimetype correctly
* [haskell-http-client] generate separate api modules, for each child api
* [haskell-http-client] add cliOption "allowNonUniqueOperationIds"
When cli option "allowNonUniqueOperationIds" is true,
allows *different* API modules to contain the same operationId,
and then each API must be imported qualified.
* Fix some go client formatting issues
* Fix go client go imports
* Run `goimports -w .` on examples directory
* Sort imports in api
* Add new line between each property
Before secret feature was used to add new line using two property
declaration in the same line. There should be no new line before
first property. The easiest way is to use `-first` special
property
https://github.com/samskivert/jmustache#-first-and--last
New line are required so `goimports` won't reformat whitespaces between
property name and type.
* Change whitespaces to tabs
* Fix whitespaces in api_client
There is a new line between each service to prevent `goimports` from
adding whitespaces between types and names
* Fix more whitespaces
There was a need to set special delimeter for formatting in the commit.
Go slices use curly braces and `jmustache` got confused when found
triple curly braces.
* Fix whitespaces in configuration.mustache
* Fix whitespaces for api response
* Support for optional description
Do not add whitespace if description is missing
* Add new lines between enum values to prevent formatting
* Generate go code from current code
- imports are not sorted :(
- there are extra whitespaces for different languages. I don't know why
* Run generate for security tests
* Move test codes in "test" to "tests".
* Simplify class name specification
* Regenerate test/Api/StoreApiTest.php
testGetInventory already exists in tests/StoreApiTest.php
This is the initial Codegen for Elm 0.18.
Please try it out and provide feedback.
Not yet supported:
* path variables;
* additionalProperties;
* authentication;
* recursive types.
* Commit leftover snapshot changes
* Add logic to deal with non-JSON body params
If the spec specifies a list of consumes MIME types, default to the
first MIME type in the list instead of "application/json" (the user may
still override this by passing "Content-Type" in options.headers).
Additionally, only perform explicit JSON serialization if the data type
of the body parameter is not "string", or if it is string, only when the
content type is "application/json".
* Update snapshots
* Added pkmst-microservice toolkit
* formatted
* replaces tab with blank spaces
* adding documentation folder
* adding documentation folder
* Update readme.mustache
Added feature set offered by pkmst
* updated readme
* Update io.swagger.codegen.CodegenConfig
Arranged pkmstServerCodeGen and SymfonyServerCodegen in aphabatical order
* Update readme.mustache
* renamed according to convention and added typeinfoannotation
* removed tabs
* updated codegen which extends abstractjavacodegen
* Added the script files and rectified the errors
* folder name changed and commons -lang3 version upgraded
* updated readme.mustache
* updated logging filter
* Added petstore to samples and updated the pom for the same
* Added java-pkmst sample to pom.xml.circleci
* updated readme.mustache
* use status codes in the variants of the responses instead of message
* samples
* add missing {{code}}
* use human friendly idents if possible
* generate samples
* salvage an oversight
* java 8 interface only delegate method mode
* typo correction
* Update samples with ./bin/spring-all-petstore.sh
* change delegate prefix to "do" and make delegate method a default method that returns an OK status code
* remove temp debug printout
* prefix spring annotated method with "_" to indicate that is private
* resolve merge issues from Merge of remote-tracking branch 'upstream/master'
* tuned whitespace in api.mustache and re-ran spring-all-petstore.sh
* removed special spring cloud library check as it was no longer being referenced in api.mustache
re-ran spring-all-petstore.sh
* [akka-scala] template upgrade dependency version and refactor #7171
* update sbt dependencies version and add enforce plugin
* delete new to the case class
* Prevent usage of reserved keyword for model fields
* Changes from code review to follow JS convention of using toParamName and toVarName
* Another small change from code review. Removing from postProcess because it is already called from somewhere else.
* Ran bin/aspnetcore-petstore-server.sh
* Added contact information to startup.cs
* updated to support NAME as well
* updated samples
* updated NAME default
* Updated Codegenerator as well as added new swagger-original mustache template
* updated Startup.cs template to provide guidance for original Swagger file
* Updated Sample
* Added support for VERSION and APPNAME from Swagger file into Startup.cs for Swashbuckle SwaggerGen
* Ran bin/aspnetcore-petstore-server.sh
* Added contact information
* Added contact information to startup.cs
* Move the test code to the appropriate test case
* currently, InvalidArgumentException will be thrown
* Remove unnecessary tests at this time
* Unify into single quotes
* MMORCH-428: Export the Authorization struct
This is needed so that code can check that the version of Authorization
in the auto-generated code is the same as the version it is using. If
the versions are not exactly the same then the lookup into the TypeMap
will not work.
* Add Rust as a supported language for client and server.
Clarify that there are two Rust client implementations, and one Rust server implementation.
* Percent-encode path and query parameters in client URLs
Fixes#122
Also don't include a question mark at the end of the path when there are no query paramters.
Fixes#121
* Rust2 client: add --host and --port parameters to example client.
Allows the example command-line client to override the default host and port.
* Extract default host and port from Swagger file.
* Derive 'Eq' and 'Ord' on enums
* Rust2: improve server code structure.
server.rs (main.rs) - main entry point for binary; starts the web server and points it at the server code within the library.
server_lib/mod.rs (lib.rs) - root of library; creates the server.
server_lib/server.rs (server.rs) - actual server code
The old server_lib/mod.rs is now server_lib/server.rs; server_lib/mod.rs is new.
This structure is easy to map onto a server implementation; unfortunately we can't get it exactly right here because of the limitations of cargo's examples/ folder.
* Rust2: Explain fully how to use the example code in your project.
* Added plaintext support
* Linting
* MGJ Markups
* Move errant file to 'rust-server'
Rust2 was the old name
* Add license and description to Cargo.toml
For rust-server, getting them from the swagger
* Valid Java doesn't have uninitialised variables...
* Default license to "Unlicense"
* Set license to "Unlicense" for generated crates
* Updated to .NET Core 2.0
* Fixed issue with IConfiguration vs. IConfigurationRoot
* Ran bin/aspnetcore-petstore-server.sh
* Updated to .NET Core 2.0
* Fixed issue with IConfiguration vs. IConfigurationRoot
* Ran bin/aspnetcore-petstore-server.sh
* Add README.md to the typescript jquery client generator
* Fix from code reviews about the addition of README.md. Made the fix in fetch too since it was a copy paste
* Operation now returns StatusCode Stubs as well
* Updated mustache file to use comments
return StatusCode(..) is now commented out.
* Change default(..) to not escape the type
default(dataType) --> default(&dataType)
* Return IActionResult no matter what..
* Updated formatting
* Ran bin/aspnetcore-petstore-server.sh
* Do not apply content-type header if no request body
* Set content-type header if there are form params
* Add tests
* Run update script
* Regenerated sample clients
* add support for async routes/endpoints
you can now set --optional-properties async=true to generate
a nancyfx server stub that uses asynchronous programming.
(cherry picked from commit 126869cb0b967e8063417e11993cf6326ce8ffd4)
* add nancyfx-petstore-server-async.sh to generate sample of async nancyfx.
* Rename async => asyncServer
* update bin/nancyfx-petstore-server-async.sh
* rename async => asyncServer in api.mustache + small bugfix
* run ./bin/nancyfx-petstore-server.sh and ./bin/nancyfx-petstore-server-async.sh
* remove additional new line in api.mustache + add space after if
* run ./bin/nancyfx-petstore-server.sh and ./bin/nancyfx-petstore-server-async.sh
* Map `date` fields to LocalDate c# type + add a JsonConverter for LocalDate.
* #6818: support for security definitions and some refactoring
* adding support for Either
* adding dates with TimeZone (date-time) and Local (date)
* cleanup
* generating code
* Updated swagger-ui wget url to https
* Issue #6902 Add Observe/ReportProgress pass through variables to the response for each api call for angular 4.3 and above
* Issue #6902 Fixed problem where extra comma as generated and should
not have been.
* Issue #6902 Fixed compiltion issue for Angular 4.3
* Objects are represented by `ModelBase.h`, not `Object.h` which does not exist.
* Use correct relative imports for files in the `model` and `api` folders.
* [CppRest] Update cpprest petstore client sample.
* Implement `Object` class to support arbitrary types.
* [CppRest] Update cpprest petstore client sample.
* [CppRest] Add newly generated files to petstore client sample.
* [CppRest] Add `Object` to CMakeLists.
* Initial Commit
* Removed unneeded class, Updated names as per naming conventions, Removed licensing info from generated code
* Moved samples from client folder to server
* Fixed naming issue with scripts in the bin
* improved code format for api
* fixed compile issue and improved formatting
* fixed compile issue and improved formatting
* update versions of dependencies on swift4 and swift3
* change syntax for swift4
* run petstore script
* change enum case from UpperCamel to lowerCamel
* remove unneeded break statements
* avoid wrapping conditionals in parentheses
* avoid force casting
* run pod update on petstore/swift4/rxswift
* update project for swift 4
* run swift4-petstore-all.sh
* fix compile error
* avoid use iso8601 date strategy for encoder / decoder
* resolve file references
* the result I want to obtain
* add csharp-petstore-net-40.bat for windows
* just ran bin\windows\csharp-petstore-all.bat
* Removed those directories:
- samples\client\petstore\csharp
- samples\client\petstore\csharp-dotnet2
then ran :
bin\windows\csharp-petstore-all.bat
* - update JsonSubTypes to 1.1.3 by using nuget dependency (the package is compatible with net40)
- allign all version of Newtonsoft.Json to 10.0.3
* the result of bin\windows\csharp-petstore-all.bat
* ran bin\security\windows\csharp-petstore.bat
* fix: non-zero exit code if tests fail
* tests: use local petserver to run tests
* fix: non-zero exit code if tests fail
* tests: use local petserver to run tests
* fix: creating ssl context in old version of Python
* chore: remove unused target from Makefile
* doc: changes from upstream
* fix: tornado client raises NotImplementedError in older version of Python
* Revert "[csharp] clean boolean additional properties 6784 (#6899)"
This reverts commit 2c9f98ce38.
* Revert "[Swift4] Add throw to reserved words (#6952)"
This reverts commit 970de01bdf.
* Revert "add a docker build tag for pushing docker image instead of just latest (#6837)"
This reverts commit 4e482eef17.
* [csharp] Convert "false" properties to booleans
It appears as though "false" strings in additionalProperties are no
longer treated as false booleans. This may be an issue elsewhere, but a
simple fix is to always explicitly set the boolean value in a generator
class back to the additionalProperties map to convert boolean Strings to
boolean Objects.
* [nancyfx] Clean up async default option handling
* [nancyfx] Include asyncServer=false in sample script
* [csharp] Regenerate samples
* [csharp] Resolve .net 4 generation issues
Some functionality is missing from .NET 4.0, such as IReadonlyDictionary
and Type.GetTypeInfo().
This commit resolves compilation of generated .NET 4.0 code, requiring
no conditional versioning of Newtonsoft.Json.
* [csharp] Regenerate .net 4.0 sample
* [csharp] Resolve .NET 4.0 sample compile
Sample build.sh wasn't accounting for targeting different FCL correctly.
That is, when passing "net40" to the -sdk option, it would use the
default -sdk:4 and -langversion:6. These don't necessarily match with
what is installed on a machine with only .NET 4.0 (which is our targeted
use case here).
To resolve, we need to define another version-specific value for passing
to the mcs -sdk option (see man mcs for details).
This option currently isn't overridable in the client codegen class.
Also, langversion is set specifically to the version of C# available to
the targeted SDK version. If there is need, we may extend this to
something like:
langversion=${MCS_LANG_VERSION:-6}
To allow users to run as:
env MCS_LANG_VERSION=5 sh build.sh
I haven't done this because I doubt there's much of a use case via this
script. I'm assuming most consumers will build via IDE or MSBuild.
* [csharp] Revert bin/csharp-petstore.sh to 3.5
* [csharp] Regenerate .NET 3.5 sample
* [csharp] Resolve nuget issue with existing files
* [csharp] Update -all.sh, regenerate samples
* master: (101 commits)
[Swift4] Allow for custom dateformatter to be used (#6672)
[haskell-http-client] fix bug when generating models-only (#6931)
fix typo: crediential => credential
minor typo fix
[csharp] fix enum serialization of first value (#6873)
[PHP] Improve docs and README (#6935)
Binary mode for file deserialization in python (#6936)
add python tornado test to travis
[Python/tornado] add integration tests and fix bugs (#6925)
Fix PHP passes response body to ApiException (#6923)
[TypeScript][Node] Resolve TS2532 error (#6932)
skip "all" shell script
minor formatting change
Fixes Issue #6841, Map for accessing additionalProperties is generated. (#6886)
add tsloughter as owner erlang
WIP: initial commit for Erlang client generator (#6502)
add back php client test
Switch Travis image from MacOS to Linux (#6937)
add link to ebook
[Scala] Default case class Option types to None for non-required fields (#6790)
...
* [csharp] Treat enum models consistently
C# works differently from most languages in that enums are not
considered objects. This means default(EnumType) will choose a default
of the first enum option. This isn't desirable because it breaks the
required = false functionality of swagger specs, which defines a
property which isn't required to exist in the message body.
Rather than force consumers to use enum values such as UNSPECIFIED, UNKNOWN,
NOT_SET, etc... we can treat enums as primitives. This means any
non-required enum will become Nullable<EnumType> regardless of whether
it is defined as an inline enum or a referenced enum model.
* Categorizing C# integration test for enums as general
* [csharp] Remove enum-ref integration test
* [csharp] Clean up general enum support integration test, validate different enum usage cases.
* [csharp][all] Assign one-based int to string enums
The EmitDefaultValue=false for string based enums will prevent the first
enum value from being serialized, because as 0 it is considered the
default.
This commit assigns an explicit numerical value to all non-integer
enums. This assignment has no effect on the
serialization/deserialization values, and only assigns the compiled
integer.
NOTE: This will have an effect of requiring recompilation of any code
that references the client/server models. This is because:
public enum Pet { Available }
Source files referencing Pet.Available as defined above will have a
constant 0 in place of the enum value.
public enum Pet { Available = 1 }
Source files referencing Pet.Available as defined above will have a
constant 1 in place of the enum value.
After compilation, Pet.Available in both instances lose their semantic
values and refer to the byte representation of their integral values.
For more info, see
https://docs.microsoft.com/en-us/dotnet/csharp/language-reference/keywords/enum
* WIP: initial commit for Erlang client generator
* add models types and function type specs
* fix type specs when models are the type and support QS lists
* make method lowercase in postprocessoperations
* add model encode function
* add erlang client sample
* add windows client sample script
* proper return type spec and handle return error messages
* remove jdk7 check
* comment out some installation
* update npm
* comment out ts angular tests
* restore ts angular2 test
* restore bash test
* add back new config, clean up commented items
* The get method template is modified to return the value of the enum instead of the enum itself.
* Update of the Petstore CXF server sample
* Update of the Petstore CXF client sample
* Update of the Petstore CXF server annotated base path sample
* Update of the Petstore CXF server non spring application sample
* adding "Read Timeout" getters and setters for the Jersey and OkHttp
based ApiClients
adding "Write Timeout" getters and setters for the OkHttp based
ApiClient
adding tests for the OkHttpClient covering the new getters and setters
* generated files from the bin scripts
* [CppRest] Replace U macro with conversion function for default string values.
* [CppRest] Replace U macro with conversion function in templates.
* [CppRest] Update cpprest petstore client sample.
* [csharp] Treat enum models consistently
C# works differently from most languages in that enums are not
considered objects. This means default(EnumType) will choose a default
of the first enum option. This isn't desirable because it breaks the
required = false functionality of swagger specs, which defines a
property which isn't required to exist in the message body.
Rather than force consumers to use enum values such as UNSPECIFIED, UNKNOWN,
NOT_SET, etc... we can treat enums as primitives. This means any
non-required enum will become Nullable<EnumType> regardless of whether
it is defined as an inline enum or a referenced enum model.
* Categorizing C# integration test for enums as general
* [csharp] Remove enum-ref integration test
* [csharp] Clean up general enum support integration test, validate different enum usage cases.
* Attempts to fix issues that causes enums that are not generated with a class to not generate correctly
* Fixed issue with incorrectly generating enums
* Replaced isomorphic fetch with portable fetch
* Ran scripts in bin
* reference custom.d.ts in api.ts
* ran scripts and added custom.d.ts files to git
* Ran scripts in bin after merge
* regenerated security tests
Enums defines as ref models have a different object structure
(CodegenModel) than those defined as inner enums (CodegenProperty). To
make these look as similar as possible, we walk all ref model enums and
reassign enumVars with the same properties inherited from the top level
CodegenProperty so CodegenModel enums can use the same templates as
inner enums.
* Implemented fix for #6006. Mime-type support for accepts and
content-type.
* Review comments of @macjohnny incorporated
* merge with latest and retest
* merge with latest and retest. Now correctly generated with new Maven build
`unicode` does not exist in py3, therefore since six is already imported
switch to using `six.u` so that `unicode` is used on py2 and `str` is used
on py3.
* Add support for the google-api-client
* When there's no return type, just return (no parsing the response)
* Update the deserialization to use a Jackson typeref.
* Delete the auth mustache files as we don't need them
* Stop generating unneeded auth files; get SBT/gradle working with the generated module
* Add builder-style methods to the google-api-client ApiClient for getting API instances
* Update the README to reflect the new client library option
* Generated overloaded methods to send query params as a Map<String, Object>
* Add files for Sample codes
* Add type in angle brackets to support Java 6
* Required query params must be added to the Map of params. Update sample code.
* Use explicit types instead of diamonds to support Java6 in one more place.
* Clean up javadoc warnings in generated code / remove pointless return statements
* Clean up extra newlines in generated code
* [kotlin] Nested enum naming fix, and naming options via CLI
* [kotlin] Add option test for enum property naming
* [kotlin] Escape all reserved/keywords for enums
The linting results for the generated samples are as follows
where the first number is the BEFORE and the second is AFTER.
pyclient 7714 vs. 120
pyclient3 7717 vs. 120
pyclient3-asyncio 7584 vs. 120
pyclient-tornado 7633 vs. 120
pyclient3-tornado 7633 vs. 120
For the complete details please see the following gist.
https://gist.github.com/kenjones-cisco/2eb69a7e8db75e9fd53789f01570d9f2
Enforces linting for python clients by running flake8 for the generated
python client.
* add support for async routes/endpoints
you can now set --optional-properties async=true to generate
a nancyfx server stub that uses asynchronous programming.
(cherry picked from commit 126869cb0b967e8063417e11993cf6326ce8ffd4)
* add nancyfx-petstore-server-async.sh to generate sample of async nancyfx.
* Rename async => asyncServer
* update bin/nancyfx-petstore-server-async.sh
* rename async => asyncServer in api.mustache + small bugfix
* run ./bin/nancyfx-petstore-server.sh and ./bin/nancyfx-petstore-server-async.sh
* remove additional new line in api.mustache + add space after if
* run ./bin/nancyfx-petstore-server.sh and ./bin/nancyfx-petstore-server-async.sh
* [Rust] Use serde Value for objects
This hopefully fixes the previous TODO; it at least fixes compilation
errors for the specific swagger model I'm working with.
* [Rust] Update Cargo.toml to specify versions
Letting the version float freely is scary, to say the least.
This gives it a better chance at being future-proof.
When the crate author had a recommended selector I picked that,
otherwise I went semver compatible.
* [Rust] Regenerate the example
C# works differently from most languages in that enums are not
considered objects. This means default(EnumType) will choose a default
of the first enum option. This isn't desirable because it breaks the
required = false functionality of swagger specs, which defines a
property which isn't required to exist in the message body.
Rather than force consumers to use enum values such as UNSPECIFIED, UNKNOWN,
NOT_SET, etc... we can treat enums as primitives. This means any
non-required enum will become Nullable<EnumType> regardless of whether
it is defined as an inline enum or a referenced enum model.
* Add addiitional files from upstream
* Remove mis-added files
* Swift3: Properly percent-escape path parameters
This change fixes the following issue:
https://github.com/swagger-api/swagger-codegen/issues/6400
The problem was that path parameters were not properly percent-escaped before being placed into the URL path. This leads to creation of an invalid URL, which then fails.
So therefore, in the API template where path parameters are handled, we propertly percent escape them, using the characters which are allowed in URL paths.
In addition to this template change, then this PR includes the following changes:
1. Resulting changes in all generated code due to the above template change.
2. I added the objcCompatible run to the swift3-petstore-all.sh so that I could re-generated all of the generated code with a single script.
3. I added a unit test in UserAPITests.swift which verifies that paths are properly escaped.
4. In order to make the unit test work, then I needed access to RequestBuilder<T>.URLString to verify that the path was properly escaped. However, RequestBuilder<T>.URLString had "internal" access control so it was inaccessible from the unit test. So therefore, I made four contants in RequestBuilder<T> to be public. This should not harm anything, since they are constants ("let's") and cannot be changed from the outside of the class after initialization.
5. There were also some stray changes which look like they were caused by having not run bin/swift3-petstore-all.sh in a while.
* [Elixir Client] Update the sample
It just executes
% bin/elixir-petstore.sh
without any code changes.
It have been affected by updating the sample swagger specification of 07b408a44a
* [Elixir Client] Fix typings in RequestBuilder
Fix following dialyzer warnings in the sample:
```
lib/swagger_petstore/api/another_fake.ex:30: Function test_special_tags/2 has no local return
lib/swagger_petstore/api/another_fake.ex:30: Function test_special_tags/3 has no local return
lib/swagger_petstore/api/another_fake.ex:32: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'patch') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:29: Function fake_outer_boolean_serialize/1 has no local return
lib/swagger_petstore/api/fake.ex:29: Function fake_outer_boolean_serialize/2 has no local return
lib/swagger_petstore/api/fake.ex:34: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:57: Function fake_outer_composite_serialize/1 has no local return
lib/swagger_petstore/api/fake.ex:57: Function fake_outer_composite_serialize/2 has no local return
lib/swagger_petstore/api/fake.ex:62: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:85: Function fake_outer_number_serialize/1 has no local return
lib/swagger_petstore/api/fake.ex:85: Function fake_outer_number_serialize/2 has no local return
lib/swagger_petstore/api/fake.ex:90: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:113: Function fake_outer_string_serialize/1 has no local return
lib/swagger_petstore/api/fake.ex:113: Function fake_outer_string_serialize/2 has no local return
lib/swagger_petstore/api/fake.ex:118: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:142: Function test_client_model/2 has no local return
lib/swagger_petstore/api/fake.ex:142: Function test_client_model/3 has no local return
lib/swagger_petstore/api/fake.ex:144: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'patch') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:181: Function test_endpoint_parameters/5 has no local return
lib/swagger_petstore/api/fake.ex:181: Function test_endpoint_parameters/6 has no local return
lib/swagger_petstore/api/fake.ex:195: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:230: Function test_enum_parameters/1 has no local return
lib/swagger_petstore/api/fake.ex:230: Function test_enum_parameters/2 has no local return
lib/swagger_petstore/api/fake.ex:242: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:266: Function test_inline_additional_properties/2 has no local return
lib/swagger_petstore/api/fake.ex:266: Function test_inline_additional_properties/3 has no local return
lib/swagger_petstore/api/fake.ex:268: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake.ex:293: Function test_json_form_data/3 has no local return
lib/swagger_petstore/api/fake.ex:293: Function test_json_form_data/4 has no local return
lib/swagger_petstore/api/fake.ex:295: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/fake_classname_tags123.ex:29: Function test_classname/2 has no local return
lib/swagger_petstore/api/fake_classname_tags123.ex:29: Function test_classname/3 has no local return
lib/swagger_petstore/api/fake_classname_tags123.ex:31: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'patch') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:30: Function add_pet/2 has no local return
lib/swagger_petstore/api/pet.ex:30: Function add_pet/3 has no local return
lib/swagger_petstore/api/pet.ex:32: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:57: Function delete_pet/2 has no local return
lib/swagger_petstore/api/pet.ex:57: Function delete_pet/3 has no local return
lib/swagger_petstore/api/pet.ex:62: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'delete') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:86: Function find_pets_by_status/2 has no local return
lib/swagger_petstore/api/pet.ex:86: Function find_pets_by_status/3 has no local return
lib/swagger_petstore/api/pet.ex:88: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:112: Function find_pets_by_tags/2 has no local return
lib/swagger_petstore/api/pet.ex:112: Function find_pets_by_tags/3 has no local return
lib/swagger_petstore/api/pet.ex:114: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:138: Function get_pet_by_id/2 has no local return
lib/swagger_petstore/api/pet.ex:138: Function get_pet_by_id/3 has no local return
lib/swagger_petstore/api/pet.ex:140: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:163: Function update_pet/2 has no local return
lib/swagger_petstore/api/pet.ex:163: Function update_pet/3 has no local return
lib/swagger_petstore/api/pet.ex:165: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'put') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:191: Function update_pet_with_form/2 has no local return
lib/swagger_petstore/api/pet.ex:191: Function update_pet_with_form/3 has no local return
lib/swagger_petstore/api/pet.ex:197: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/pet.ex:223: Function upload_file/2 has no local return
lib/swagger_petstore/api/pet.ex:223: Function upload_file/3 has no local return
lib/swagger_petstore/api/pet.ex:229: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/store.ex:30: Function delete_order/2 has no local return
lib/swagger_petstore/api/store.ex:30: Function delete_order/3 has no local return
lib/swagger_petstore/api/store.ex:32: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'delete') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/store.ex:54: Function get_inventory/1 has no local return
lib/swagger_petstore/api/store.ex:54: Function get_inventory/2 has no local return
lib/swagger_petstore/api/store.ex:56: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/store.ex:79: Function get_order_by_id/2 has no local return
lib/swagger_petstore/api/store.ex:79: Function get_order_by_id/3 has no local return
lib/swagger_petstore/api/store.ex:81: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/store.ex:104: Function place_order/2 has no local return
lib/swagger_petstore/api/store.ex:104: Function place_order/3 has no local return
lib/swagger_petstore/api/store.ex:106: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:30: Function create_user/2 has no local return
lib/swagger_petstore/api/user.ex:30: Function create_user/3 has no local return
lib/swagger_petstore/api/user.ex:32: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:56: Function create_users_with_array_input/2 has no local return
lib/swagger_petstore/api/user.ex:56: Function create_users_with_array_input/3 has no local return
lib/swagger_petstore/api/user.ex:58: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:82: Function create_users_with_list_input/2 has no local return
lib/swagger_petstore/api/user.ex:82: Function create_users_with_list_input/3 has no local return
lib/swagger_petstore/api/user.ex:84: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'post') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:108: Function delete_user/2 has no local return
lib/swagger_petstore/api/user.ex:108: Function delete_user/3 has no local return
lib/swagger_petstore/api/user.ex:110: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'delete') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:133: Function get_user_by_name/2 has no local return
lib/swagger_petstore/api/user.ex:133: Function get_user_by_name/3 has no local return
lib/swagger_petstore/api/user.ex:135: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:159: Function login_user/3 has no local return
lib/swagger_petstore/api/user.ex:159: Function login_user/4 has no local return
lib/swagger_petstore/api/user.ex:161: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:185: Function logout_user/1 has no local return
lib/swagger_petstore/api/user.ex:185: Function logout_user/2 has no local return
lib/swagger_petstore/api/user.ex:187: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'get') breaks the contract (map(),'Elixir.String':t()) -> map()
lib/swagger_petstore/api/user.ex:211: Function update_user/3 has no local return
lib/swagger_petstore/api/user.ex:211: Function update_user/4 has no local return
lib/swagger_petstore/api/user.ex:213: The call 'Elixir.SwaggerPetstore.RequestBuilder':method(#{},'put') breaks the contract (map(),'Elixir.String':t()) -> map()
```
* Correct default value for resteasy query parameters
* clean up: add default value in query params for resteasy mustache templates
.
* clean up
* add space following wing328 recommandation.
* Add configuration to split input and output bean validations. When useBeanValidation is used, the variable are created in the application.conf file and can be tweaked by environment. For example, dev and stage can have true to both but only have input in prod.
* Refactor of mustache tags for more clarity
* sample generation with refactor
* Fix a couple of bugs with the fake-endpoint yaml but there is still 2 cases where it doesn't work.
* Remove Accept request header from api signature
* Inject HttpServletRequest to get request header and clean templates
* Use constructor injection for HttpServletRequest
* Implement example in default controller responses
The linting results for the generated samples are as follows
where the first number is the BEFORE and the second is AFTER.
flaskConnexion 1843 vs. 20
flaskConnexion-python2 1841 vs. 19
For the complete details please see the following gist.
https://gist.github.com/kenjones-cisco/edc9d71ef7fd2bf23714ecbb693d52b3
Enable the creation of the entrypoint so that the server can be started
using a named command instead of needing to always use `python -m` to
run the server.
* Added forRoot and constructure duplicate check
* added imports
* updated providers display format
* updated examples
* Moved providers so users don't hav eto use forRoot if they don't want.
* Updated the readme
* [angular-typescript] imports HttpClientModule
HttpModule has no effect, since the new `HttpClient` is now used. fixes#6727
* #6727: import http client module or http module, depending on setting
* #6727: import http client module or http module, depending on setting
* #6727: generate samples
flatten methods replaces original ObjectProperty objects with new
RefProperty objects which required variables are false as default.
Newly created objects' required variables are set as the original
property.
* Added v4/v4.3 to typescript-angular-petsotre-all and renamed from angular2 to angular
* refactored typescript-angular-petstore-all.sh
* changed profile id for typescript-angularjs to properly have angularjs instead of just angular.
* Spacing at end of model template
* Corrected backwards compatible enum typing
* Removed commented code
* Input validation is now supported as strict JSON validation
* [PHP][Symfony] Improve the implementation
Closes#6614
* Generated code is tested to assure it compiles and updated README to dynamically load dependencies via composer
* Updated shell script because shippable tests were failing
* Replaced the method for updating path to prep for URL encoding.
The new method will switch TypeScript-Angular variables from snake_case to camelCase in the URL generation.
Imported StringBuffer, Matcher, and Pattern, since the new solution needs them.
Some extra whitespace on blank lines was removed.
* Since these were not up to date with the current master, I ran them and am commiting them here.
This way, the changes are shown here instead of after future commits.
* Simplified the code for the path conversion A LOT.
New version is much simpler to follow, and very efficient - only one iteration through the length of the string.
Removed regex Matcher and Pattern classes, since they weren't needed anymore.
* Updated api_client and configuration docstrings
ApiClient: Removed host param, added configuration and cookie param
Configuration: Docstrings are only read from the @property decorated
function, not the setter, moved the more descriptive docstrings from the
setters to property functions
* Ran bin/python-petstore.sh
* Inclusion of API documentation in CXF Server stub generation
* Inclusion of API documentation in CXF client generation
* Update of the Petstore CXF server sample
* Update of the Petstore CXF client sample
* Update of the Petstore CXF server annotated base path sample
* Update of the Petstore CXF server non spring application sample
* Changed {{{appDescription}}} to {{appDescription}} to use the HTML-escaped value in handling special characters like <, > in the description following the correction made by @wing328
* Update of the Petstore CXF samples
* revert changes to fakes yaml
the yaml currently includes invalid definitions that do not exist: ('#/definitions/xmlObject').
revert to known good yaml state.
* update template creators
* Rust API client/server generator
* `Future::boxed()` has been deprecated - replace with `Box::new(...)`
* rebasing to rust
* MMMLS211 use empty vec over none
* MMMLS211 rebuild after merge from rust
* MMMLS211 YAML array examples not wrapped in Some()
* MMMLS211 Array parameters bad mustache fix
* MMMLS211 don't parse map containers
* MMMLS211 Tidy container types
* MMMLS-211 rebuild example
* MMMLS211 mvn rebuild
* Percent-decode parameters contained in the path
* Produce warnings when unknown fields are present
We still accept unknown fields and discard them. However, to improve
diagnosability, we now write a warning log and return a `Warning`
header.
Note that this is server-only
* Markup
* MMMLS211: Make optional arrays Options again
* 211 markups
* Temporary attempt at tweaking Cow ownership tweak while merging changes from rust branch
* Remove to_string call while parsing path parameters, which requires definining a temporary var in a block because rust can't tell where a Cow reference gets dropped
* Fix rustfmt to the correct version
* Fix rustfmt to the correct version
* Add more response information to ApiError in client
* Re-add missing brace
* Code review markups
* Allow converting out of wrapper types
* Store arrays in new-types too
* Use a new hyper_client every request
* Add vec-like traits to array types
* Xml support - new branch
* Moved conversion from serde_xml_rs::Error to ApiError from swagger-rs to client code until upstream PR is accepted
* MMSUB-172 Don't set Content-Type when there's no body.
If we don't have a body we've serialized, then don't declare
any content type for the nonexistent body.
This is really important for 204 No Content responses, but it's
also morally important for all other non-bodied responses.
* MMSUB-172 Move to swagger 0.6.
* Manually implement debug for the client
* Allow `Context` to be bound to `Api`, and not passed on every function call
* Support "." in parameter names
* Support generate's "--reserved-words-mappings" option
* Support "." in parameter names
* Support generate's "--reserved-words-mappings" option
* Included Open Systems International in the list of companies using Swagger Codegen
* Force Jackson to use the real names of the properties of the Data type defined in the YAML
* Update of the Petstore CXF server sample
* Update of the Petstore CXF client sample
* Update of the Petstore CXF server annotated base path sample
* Update of the Petstore CXF server non spring application sample
* Changed {{name}} for {{baseName}} following the correction posted by @wing328
* Update of the Petstore CXF server sample
* ContentType selection fix for csharp.
Updated to reflect java implementation. Previously any request body of type string was having the content type overridden to 'application/json'. This prevented custom json ContentTypes
* updated the petshop codegen for C#
* Fixed content type selection test for csharp
* Replaced tabs with 4 spaces
* Removed trailing space / string comparison
* [Elixir Client] Improve primitive typings
* [Elixir Client] Add type to models
Fix following dialyzer warnings in the sample:
```
:0: Unknown type 'Elixir.SwaggerPetstore.Model.ApiResponse':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.Client':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.Order':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.OuterBoolean':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.OuterComposite':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.OuterNumber':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.OuterString':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.Pet':t/0
:0: Unknown type 'Elixir.SwaggerPetstore.Model.User':t/0
```
* Adding a Scalaz codegen client
* Fixing imports and removing commented code
* Adding the bash file and updating the Pet store samples for Scalaz.
* Finalizing Scalaz generation so that it works for the Petstore.yaml
* Removing some unnecessary files and comments
* Removing some files that were accidentally generated for the wrong Scala
* Added support for enums in Dart.
* Pick non-private names for enum values.
The _ prefix denotes a private member in Dart, so avoid generating enum values starting with this character.
* Properly encode enum values into query paramters.
* Various cleanups.
* Add support for x-enum-values extension.
Use class instead of enum for better ergonomy.
Better generated enum names.
* Fixed test.
* Support enum descriptions.
* Updated api client, Required parameters {{#required}} .. {{/required}}, are mapped to Eiffel
Void Safety Rules, optional parameters are translated to detachable TYPE.
Validation Rules are mapped to preconditions, at the moment maximun and minimun
validation has been added.
Improved API_CLIENT.parameter_to_tuple feature to accept a LIST [ANY] instead of LIST [STRING_32].
Improved model template to generate the model output.
* Updated API_CLIENT.parameter_to_string feature, missing STRING representation.
* Updating sample using the latest modifications.
Fixes#5985
We were experiencing syntax issues when generating the Petstore example. See some of the examples below:
StoreApiInterface.php
namespace Swagger\Server\Api;
use Symfony\Component\HttpKernel\Exception\NotFoundHttpException;
use Swagger\Server\Model\Order;
**use maparray<string,int>;**
use Symfony\Component\HttpKernel\Exception\BadRequestHttpException;
UserApiInterface.php
public function createUsersWithArrayInput(**User[]** $body);
public function createUsersWithListInput(User[] $body);
As far as I know, it is not possible to use array of objects in this way.
PetApiInterface.php
namespace Swagger\Server\Api;
use Symfony\Component\HttpKernel\Exception\NotFoundHttpException;
use Swagger\Server\Model\Pet;
use Symfony\Component\HttpKernel\Exception\MethodNotAllowedHttpException;
use Swagger\Server\Model\ApiResponse;
**use string[];**
use Symfony\Component\HttpKernel\Exception\BadRequestHttpException;
public function findPetsByStatus(string[] $status);
public function findPetsByTags(string[] $tags);
* Add addiitional files from upstream
* Remove mis-added files
* Add additional swift4 initializer for initializing model object with properties.
This change fixes this issue: https://github.com/swagger-api/swagger-codegen/issues/6641
It adds an additional initializer which allows model objects to be initialized using the properties. For exxample, if we had this model:
"ErrorInfo": {
"type": "object",
"properties": {
"code": {
"type": "integer",
"format": "int32"
},
"message": {
"type": "string"
},
"details": {
"type": "array",
"items": {
"type": "string"
}
}
},
"description": "Example Error object"
},
This we generate an initializer for this model object like this:
public init(code: Int?, message: String?, details: [String]?) {
self.code = code
self.message = message
self.details = details
}
* Add hasVars checks around initializers and re-run all scripts to re-generate
Void Safety Rules, optional parameters are translated to detachable TYPE.
Validation Rules are mapped to preconditions, at the moment maximun and minimun
validation has been added.
Improved API_CLIENT.parameter_to_tuple feature to accept a LIST [ANY] instead of LIST [STRING_32].
Improved model template to generate the model output.
* Add addiitional files from upstream
* Remove mis-added files
* Fix compilation issue with Swift4 inline enums.
This change fixes this issue: https://github.com/swagger-api/swagger-codegen/issues/6607
The problem was that I was using "datatype" instead of "datatypeWithEnum" in the model.mustache file.
When you have a the following model property:
"myInlineStringEnum": {
"type": "string",
"enum": [
"inlineStringEnumValue1",
"inlineStringEnumValue2",
"inlineStringEnumValue3"
]
}
Then we were generating:
public enum MyInlineStringEnum: String, Codable {
case inlinestringenumvalue1 = "inlineStringEnumValue1"
case inlinestringenumvalue2 = "inlineStringEnumValue2"
case inlinestringenumvalue3 = "inlineStringEnumValue3"
}
However, when we decode this, we were using type of the enum ("datatype") rather than the enum type itself ("datatypeWithEnum"). So we were generating:
myInlineStringEnum = try container.decodeIfPresent(String.self, forKey: "myInlineStringEnum")
rather than:
myInlineStringEnum = try container.decodeIfPresent(MyInlineStringEnum.self, forKey: "myInlineStringEnum")
* Adds the ability to create code for an interface-based jaxrs client.
* Adds shell script and sample files for jaxrs-spec-interface
* rebase into adds shell
* Fixes bug in creation of Produces/Consumes in method annotation. Allows for instance "application/json; charset=utf-8"
* Fixes generated pom.xml
* Generate pom.xml by default
* Prettier output from api.mustache
* Fixes bug in mediatype, allowing charset-specification in swagger.yaml.
* Merges generation of interface-based jaxrs client/api into jaxrs-spec.
* Moves jaxrs-spec server interface to match location of jaxrs-spec server
* Makes Generated-annotation in genereated classes slightly prettier.
* Add Ada client petstore samples
- Add script to generate Ada client support with swagger-codegen
- Add files to build the Ada sample
- Add main program to use the generated client samples API
and connect to the server to perform some operations
* Add some description for the samples
* Update the documentation to explain how to build, how to use the generated Ada client code
* represent swagger enums as union of literal types
enabling their easy use in angular templates, structural subtyping
among enums (in particular, different instances of the same enum
are now mutually assignable), improving type safety by preventing
incorrect widening, and permitting numeric enum values
(albeit without descriptive names)
Fixes#6206, #5146, #3500
* update samples
* restore blank lines at end of file
* fix typo
* Add support for lists of path parameters (eg instances), and default params for optional case classes
* Update Petstore sample
* Revert defaulting of case class fields to None
* Update Petstore sample
* add support for auth methods
* use newtypes for required params
* fix duplicate operationId issues
* prevent aliasing of vendorextension references in fromOperation
* add --fast to stack ci build
* [objc] Update deployment target to 8.0
Updates the test project deployment target to 8.0, as that's the lowest
supported by the latest XCode.
* [objc] Update petstore tests based on current master
Makes sure the tests are based on the latest version of master.
* [objc] Allow specifying the serialization timezone
Now it's possible to specify the timezone used for serializing dates
* Add test which reproduce the warning #5338https://github.com/swagger-api/swagger-codegen/issues/5338#issuecomment-292502895
`[main] WARN io.swagger.codegen.languages.PhpClientCodegen - Type object not handled properly in setParameterExampleValue`
* Fix Type object not handled properly in setParameterExampleValue
* Update samples
- /bin/php-petstore.sh
- /bin/security/php-petstore.sh
* Added namespace mustache to be generated
* Fixed syntax issues with package generation
* Added Response and Element mustache templates
* Added ApiClient
* Fix: Only required parameters needed for api operations
* Added documentation generated code
* Regenerated petstore samples
* Fixed url paths for operations
* Fixed based on comments in issues #6520
* Regenerated petstore samples
* Ada language support (generic generator)
Implement the AbstractAdaCodegen class with the Ada keywords and global
behavior for Ada language
* Ada language support (main generator)
Implement the AdaCodegen class for the Ada client and server code generator
Initial implementation based on a mix from CppRestClientCodegen, NodeJSServerCodegen
* Ada language support: register the AdaCodegen generator class
* Ada language license template
* Ada language model templates (spec and body)
* Ada language client spec and body templates
* Ada language server spec and body templates
* Fix escaping Ada keywords for parameter name
* Generate GNAT project and update type mappings
- Use 'p_' as escape prefix for parameter names because identifiers are not allowed to start with '_'
- Add GNAT project file generation
- Update the type mappings to use the Swagger package types
* Fix generation of operations with no parameters
* Fix instantiation of Ada.Containers.Vectors package in generated model files
* New template for the GNAT project file generation
* Fix datatype generation for Ada language
- Override the getTypeDeclaration function to specify the datatype
- Fix definition of language predefined types
* Add a Serialize procedure declaration for the Ada model generation
* Add a Serialize procedure for the Ada template model generation
* Fix operation name and parameter name for Ada
- Declare and implement toAdaIdentifier function to verify and turn some identifier
to Ada identifier following Ada style
- Override toOperationId and use toAdaIdentifier for generation of operation name
- Update toParamName to use toAdaIdentifier
* Media type support for Ada code generator
- Implement postProcessMediaTypes function to add a 'adaMediaType' member
to each media type and map it to some Ada enumeration
- Post process the 'produces' and 'consumes' media type of an operation
* Use x-has-notes extension to avoid emitting notes when they are empty
* First generation for Ada client operation body
* Add a x-has-uniq-produces and x-has-uniq-consumes to media types
to indicate that the list contains only one item, this is necessary
for Ada generator for generation of arrays with one item only
* Add a postProcessParameter for Ada code generator to emit a x-is-model-type attribute
* Update Ada client body template for the serialization of data
* Fix postProcessParameter in Ada code generator to take into account file parameters
* Update the Ada client body to support form parameters
* Fix type name used for mapped types in the Ada generator
* Declare a Deserialize procedure for the Ada generated model
* Override the fromOperation for Ada client code generator
- Emit a x-codegen-response extension with the response description type
- Emit a x-id-model-type extension for each type property
* Update the Ada client package spec template to declare the result type
* Add support to extract response and return result in Ada client code
* Fix Ada postProcessModels to handle container properties and emit a correct x-is-model-type attribute
* Add support for Deserialize procedure in the Ada model generator
* Fix indentation of generated Ada client body package
* Add projectName option to configure the GNAT project name
* Update the GNAT project name for the Ada code generator
* Cleanup implementation and remove unused code
* Cleanup implementation and remove unused code
* Fix javadoc errors
* Use 'ada' for the language name to follow swagger-codegen convention
Add (beta) to the help description
Fix a NPE that occurs with incomplete yaml descriptions
* CsharpDotNet2Client - Use clientPackage in additionalProperties if provided
* Give execution rights for csharp-dotnet2-petstore.sh
* Fix generation of C#.net2 apiPackage, modelPackage, clientPackage
* Fix modelPackage property missing when generating models
* Initialize clientPackage in constructor
* Retrofit2: Return ResponseBody if response if file.
Until now
--------------------
If a swagger endpoint returned a file (e.g. an image), then the Retrofit2
template has choosen the return type java.io.File. However, retrofit cannot
deal with this and throws a com.google.gson.stream.MalformedJsonException.
New:
-------------------
If a swagger endpoint returns a file, then the corresponding Retrofit2 endpoint
will return a okhttp3.ResponseBody which can be used to retrieve the file.
* fix Interface Prefix
* Retrofit2: Return ResponseBody if response if file.
Until now
--------------------
If a swagger endpoint returned a file (e.g. an image), then the Retrofit2
template has choosen the return type java.io.File. However, retrofit cannot
deal with this and throws a com.google.gson.stream.MalformedJsonException.
New:
-------------------
If a swagger endpoint returns a file, then the corresponding Retrofit2 endpoint
will return a okhttp3.ResponseBody which can be used to retrieve the file.
* Add the option packageContext for nancyFx which allows a better adjustment of the namespace.
* run nancyfx-petstore-server.bat
A type alias in this context is where a model is simply another name for a
primitive type, such as `MyString` in the following model definitions:
MyList:
type: array
items:
$ref: '#/definitions/MyString'
MyString:
type: string
It is valid to use a type alias as a property in another object or array model,
even if the object/array is defined before the alias is, as in the example
above. However, the current alias logic only looks "back" in list of previously
defined models, meaning that `MyList` would not know that `MyString` is an
alias. This change fixes the incorrect behavior by pre-calculating the list of
aliases before any models are processed. It also changes the test endpoint to
verify the correct behavior even when an object is defined before an alias it
uses.
* fix compilation error in eclipse
by updating package declarations in moved files
(eclipse validates that package and folder names match)
* permit specifying the full angular version
simplifying the templates by moving trivial case splits to the model
* remove dead code
this method is never called ...
* support HttpClient in addition to Http, clean up generated code
Fixes#6080
* added new sample, and regenerated existing samples
* updated samples
this time with the freshly build generator ...
* improve formatting
* updated samples
* fix compilation error in generated code
the overload for blobs does not have a type parameter
* added the first test for the utils package
* fix extra trainling commas in function argument lists
* regenerated samples
* Adding support for non dictionary body types.
* Adding test for rest of the swift3 types
* Cleaning up implementation of makeRequest and adding better error handling.
* Adding ClientError for error produced before request is sent.
* Changing how encoding of body data is handled.
* Cleaning up code that was modified.
A previous change to make the regex a variable to allow proper linting
resulted in the regexp not having access to the value associated with
the variable and the path variable not being replaced.
Moves the regexp variable inside the for loop to allow the value to be
used and the path variable to be replaced with the provided value.
* Fix dependencies and generate model classes
* Better elixir client generation.
Responses are parsed and serialized by Poison into the model structs.
Use shared helper functions to generate the request.
Extract client connection configuration from api calls.
Elixir client can sanitize the operationId
Correctly output the model variables. Fix typos
Fix path replacement when there are multiple replacements
Cannot separate globally shared parameters from operations
Error handling for the tesla response
update templates
Can generate clients that compile
Can make requests - parse optional params, build query
Add oauth to connection. Fix connection directory
Add basic auth helper for creating a connection
Fix map types. Fix guard clauses for creaing connections
Add licenceInfo template. Parse config for moduleName via standard invokerPackage option
Can provide and inject a license header into all source files
fix location of connection.ex
Move shared code into reusable modules
Elixir filenames should be underscored
Fix visibility of helper functions
Parse the packageName from config options
Handle date and datetime fields with DateTime.from_iso8601
Fix indentation
Update documentation, add typespecs
Generate a standard elixir .gitignore
typespec is calculated recursively in java
Use the JSON middleware and using Poison.Decoder.decode on already parsed structs
move decoded struct into java
Fix handling of non-json responses
Switch basic auth to use the provided Tesla.Middleware.BasicAuth
Update README template to include the appDescription
Update sample elixir client
remove junk client models that don't belong with petstore
Only implement Poison.Decoder protocol if needed
Update samples with skipped Poison.Deocder impl
* Handle multipart file uploads
Handle building form params in the body
Files are handled as strings for input
* Requests with no defined return type will return the Tesla.Env response
* Run the bin/elixir-petstore.sh
* * Fix bugs in api.mustache, model.mustache, mostly bracket errors or small typos
* Added section about installation in README.mustace
TODO: fix tests in testthat
TODO: fix bug in description.mustace regarding package name
* Updates to sample for R client caused by running ./bin/r-petstore.sh (or .\bin\windows\r-petstore.bat)
* Add R specific files to .gitignore
* [R] add additional files generated by the petstore sample. (see #6520)
The only special handling was for security definition type `apiKey`
in `query`. All the other security configurations should result in the
same generated code.
Moves the handling of the special query parameters outside of the
`parameters without specific cardinality` section.
To cover the scenario where `elif` was being used, simply leverage the
builtin `continue` statement to stop processing the specific query
parameter and continue to the next available query parameter, if any.
Manually test with multiple different combinations.
Resolves: #6526
* Update samples
./bin/php-petstore.sh
* Remove unnecessary implements entry
ModelInterface, ArrayAccess are already implemented in parent
* Remove field `container` which is already defined in parent
* Change snake case to lower camel case
- invalid_properties
- allowed_values
* Improve doc commenct style
* Improve description length
* Improve length
* Doc comment short description must start with a capital letter
* Add a line between @param and @return
* Delete an additinal blank line at end of doc comment
* Udpate petstore-security-test
* upgraded zend-expressive from version 1 to 2
* Changed error handler for compatibility with Zend Expressive 2
* generated newest sample files for Petstore ze-ph
* removed ErrorMiddleware because it is never been used anymore. Regenerated samples
* removed ErrorMiddleware Template from Codegen
* remove ErrorMiddleware from petstore sample
* Fixed some code styles
* regenerated ze-ph samples with corrected code styles
* added new line at the end of the file
* [QT5][CPP] Fixing issue with maps in models
- Adjusted init function to init map correctly
- Adjusted cleanup function to cleanup maps correctly
* Fixed formatting for samples
Previously, we had implemented the Codable protocol by simply claiming conformance, and making sure that each of our internal classes also implemented the Codable protocol. So our model classes looked like:
class MyModel: Codable {
var propInt: Int
var propString: String
}
class MyOtherModel: Codable {
var propModel: MyModel
}
Previously, our additionalProperties implementation would have meant an object schema with an additionalProperties of Int type would have looked like:
class MyModelWithAdditionalProperties: Codable {
var additionalProperties: [String: Int]
}
But the default implementation of Codable would have serialized MyModelWithAdditionalProperties like this:
{
"additionalProperties": {
"myInt1": 1,
"myInt2": 2,
"myInt3": 3
}
}
The default implementation would put the additionalProperties in its own dictionary (which would be incorrect), as opposed to the desired serialization of:
{
"myInt1": 1,
"myInt2": 2,
"myInt3": 3
}
So therefore, the only way to support this was to do our own implementation of the Codable protocol. The Codable protocol is actually two protocols: Encodable and Decodable.
So therefore, this change generates implementations of Encodable and Decodable for each generated model class. So the new generated classes look like:
class MyModel: Codable {
var propInt: Int
var propString: String
// Encodable protocol methods
public func encode(to encoder: Encoder) throws {
var container = encoder.container(keyedBy: String.self)
try container.encode(propInt, forKey: "propInt")
try container.encode(propString, forKey: "propString")
}
// Decodable protocol methods
public required init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: String.self)
propInt = try container.decode(Int.self, forKey: "propInt")
propString = try container.decode(String.self, forKey: "propString")
}
}
class MyOtherModel: Codable {
var propModel: MyModel
// Encodable protocol methods
public func encode(to encoder: Encoder) throws {
var container = encoder.container(keyedBy: String.self)
try container.encode(propModel, forKey: "propModel")
}
// Decodable protocol methods
public required init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: String.self)
propModel = try container.decode(MyModel.self, forKey: "propModel")
}
}
This is the equivalent change in the swift4 module which was made in the swift3 module in this PR:
https://github.com/swagger-api/swagger-codegen/pull/6274
This updates AlamofireImplementations.mustache to handle when the response is an URL. It also makes changes in the generated sample code for:
* default configuration (no promisekit or rxswift)
* promisekit
* rxswift
Also, in order to build, the generated code needed to be updated with the change in CodableHelper which changes dataDecodingStrategy to ".base64" from its previous definition in earlier Xcode 9 betas.
*
* point readme links to canonical locations
* use lenses for non-required model fields, instead of traversals
* fix .gitignore generation
* fix dateFormat cli option bug
* [ANDROID][volley] Handle UnsupportedEncodingException in invokeAPI (Issue #6432)
The constructor of StringEntity can throw UnsupportedEncodingException, which is not catch nor thrown by createRequest method.
Therefore the build of android client fails with:
ApiInvoker.java:448: error: unreported exception UnsupportedEncodingException; must be caught or declared to be thrown
This commit adds a try ... catch on UnsupportedEncodingException in invokeAPI methods and declare this exception to be thrown in createRequest
* [ANDROID][volley] Handle UnsupportedEncodingException in invokeAPI (Issue #6432)
The constructor of StringEntity can throw UnsupportedEncodingException, which is not catch nor thrown by createRequest method.
Therefore the build of android client fails with:
ApiInvoker.java:448: error: unreported exception UnsupportedEncodingException; must be caught or declared to be thrown
This commit adds a try ... catch on UnsupportedEncodingException in invokeAPI methods and declare this exception to be thrown in createRequest
* [ANDROID][Volley] Handle UnsupportedEncodingException (Issue #6432)
Throw more precise ApiException
* [csharp] Explicitly set supportsInheritance
* [csharp] set supportsInheritance for client
This includes supportsInheritance only for the client codegen at the
moment, because setting in AbstractCSharpCodegen would require the
change to be tested in all derived generators, possibly including
similar template changes to this commit's.
* include nice improvement of https://github.com/jimschubert/swagger-codegen/tree/csharp/3829 and leverage https://github.com/manuc66/JsonSubTypes for subtype deserialization
* remove duplicate base validations
* remove useless tests
* restore documentation for properties coming from parent
* launch bin/security/csharp-petstore.sh
* it's impossible to call an explicitly implemented interface-method on the base class
(https://stackoverflow.com/questions/5976216/how-to-call-an-explicitly-implemented-interface-method-on-the-base-class)
* restore portion of code that was lost
* regenerate more
* fix missing using
* take the multi .net compatible revision
* keep generated model simple when no hierarchy involved
* regenerate with:
- bin/csharp-petstore-all.sh && bin/security/csharp-petstore.sh
- bin/csharp-dotnet2-petstore.sh && bin/csharp-petstore.sh && bin/csharp-petstore-netcore-project.sh && bin/csharp-petstore-net-standard.sh && bin/csharp-property-changed-petstore.sh
* fix sln indentation and the missing windows runner for dotnet2
* fix inheritance GetHashCode and Equals
* override instead of hiding the base method
+ fix the csharp-property-changed-petstore.bat
* By default the value of the discriminator property must be the name of the current schema
* Add test for subtype deserialisation from parent type
* add missing '.bat' and use the 'call' template from javascript-petstore-all.bat
add missing file to trigger it on windows
* fix default value bug
* cleanup copyright information
* formatting after merge
* fix merge
* applying bin/csharp-petstore-all.sh
* applying bin/security/csharp-petstore.sh
All Model classes include a set of methods - it makes sense to align them to a concrete interface to improve strict typing when referencing these models.
* add r client codegen
* update r api, model templates
* various fix
* rename Json to JSON
* more enhancements
* fix json handling
* add file upload support, var name to handle hyphen
* use httr::upload_file
* Fix Uuid parse
* Add isString = true when property is Uuid
This will not break previous code
* Update conversionBegin.mustache
* Update conversionEnd.mustache
* - Added javax.validation.Valid annotation to modules/swagger-codegen/src/main/resources/JavaJaxRS/spec/bodyParams.mustache
- Added bean validation and api description to modules/swagger-codegen/src/main/resources/JavaJaxRS/spec/headerParams.mustache
- Added api description to modules/swagger-codegen/src/main/resources/JavaJaxRS/spec/queryParams.mustache
- Added interfaceOnly parameter management to modules/swagger-codegen/src/main/java/io/swagger/codegen/languages/JavaJAXRSSpecServerCodegen.java to generate only interfaces and models.
- Added interfaceOnly parameter management to modules/swagger-codegen/src/main/resources/JavaJaxRS/spec/api.mustache
- Added throws java.lang.Exception to modules/swagger-codegen/src/main/resources/JavaJaxRS/spec/api.mustache
* Run ./bin/jaxrs-spec-petstore-server.sh
* jaxrs-spec: javax.validation.Valid model attributes for array items
* Run ./bin/jaxrs-spec-petstore-server.sh
* two fixes: 1) extra ?'s at end of some url's 2) enums not being called out w/ rawValue to get the proper string name
* update samples
* one step closer
* closer implementation
* break on optional decode failing since it's an optional we don't want to fail the whole decode
* update samples
* two fixes: 1) extra ?'s at end of some url's 2) enums not being called out w/ rawValue to get the proper string name
* update samples
* one step closer
* closer implementation
* add back in array decoders
* regenerate samples
* Use the right package name for the Rust crate.
* Change getters on models to return Option for non-required fields.
* Cleanup Rust generation and get example compiling again.
* Use underscore names for functions.
Until now
--------------------
If a swagger endpoint returned a file (e.g. an image), then the Retrofit2
template has choosen the return type java.io.File. However, retrofit cannot
deal with this and throws a com.google.gson.stream.MalformedJsonException.
New:
-------------------
If a swagger endpoint returns a file, then the corresponding Retrofit2 endpoint
will return a okhttp3.ResponseBody which can be used to retrieve the file.
* Implemented support for Play! 2.5.x / java8
* Added petstore sample for play25
* implemented play25 support
implemented version switch via playVersion config option
* fixed compilation failure after merge
* Disabled generation of CustomInstantDeserializer if dateLibrary equals to java8
* two fixes: 1) extra ?'s at end of some url's 2) enums not being called out w/ rawValue to get the proper string name
* update samples
* one step closer
* closer implementation
* fix unwrapRequired models when we have a parameter named result
* Rrename for angular and angularjs to reflect naming guidelines
see http://angularjs.blogspot.com.au/2017/01/branding-guidelines-for-angular-and.html
- move makes typescript-angular -> typescript-angularjs
- move makes typescript-angular2 -> typescript-angular
Language string with generate was already this so generation shouldnt change
but class naming follows this convention now
* Fixing merge problems
* Support additionalproperties and more.
- Upgrade to TypeScript 2
- Use type definition from npm instead of typings, typings is deprecation
- Use Enum instead of String Literal Types
- Use typescript es6 lib for target es5
- Support additionalproperties
- Support JSDoc
- Add snapshot and npmRepository option
- Update typescript-fetch run script for linux
- Create typescript-fetch run script for windows
* Update and fix
- Fix circle run script
- Fix duplicate query parameter
* Rename typescript-fetch folder to lowercase
* Fix for review and update new line end of file
* Fix end of file
* rename script to {lang}-petstore-all.sh and fix test
* Fix override query string
https://stackoverflow.com/a/7517673/1077943
* - check C++ keywords
- setter for SSL configuration
* recreate example QT5CPP
* only emit error signal if error happens
* provide more error information
* regenerate example QT5CPP
* * use reserved words in abstract cpp generator
* update CppRest examples
* remove tabs
* two fixes: 1) extra ?'s at end of some url's 2) enums not being called out w/ rawValue to get the proper string name
* update samples
* one step closer
* closer implementation
* fix build when using unwrapRequired option
Checking for "trueness" here is not sufficient. An empty list has a truth
value of false so it will not be encoded as json and sent as the request
body as it should. Instead we need to check explicitly if body is None.
If a data class has no optional parameters, a trailing comma (which was
supposed to delimit the list of required and optional parameters) will be
inserted after the last required paramter, leading to a syntax error in
Kotlin.
* fix a bug whereby OAuth intercept method calls itself forever
When the response is 401 or 403, the interceptor assumes that it is because of token so it keeps retrying the request with new token. However if the response status is due to the fact that authorization to the api endpoint failed, and not due to invalid token, then a recursive operation of updating token and re-requesting the failed request happens.
* change binary OR operator: | to normal OR operator: ||
although binary may work, it's unusual and likely was unintentional.
* trying an approach with providing asyncio as a framework.
* adding example of asyncio.
* removing sample client to help PR look more manageable.
* possibly fixing a unit test
* getting unit test to pass again.
* addressing comments.
* [java-vertx] make vertx client support running on different contexts
* [java-vertx] make vertx client support running on different contexts (samples)
* Removals of most of the warnings found by lint
* Removals of most of the warnings found by lint (PART 2)
* Removals of most of the warnings found by lint (PART 3)
* Removals of most of the warnings found by lint (PART 4)
* Removals of most of the warnings found by lint (PART 5)
* Fix conversion error
* Removal of unnecessary import. Other will need more complex login in the generator itself (not in the mustache files)
* Add missing imports + fix to the regex. Generation of the samples
* 1st commit of lua generator
* add petstore sample
* various fixes based on feedback
* better return handling
* check status code 1st letter
* add support for query parameters, auth, body param
* more fixes based on daurnimator feedback
* more fixes based on daurnimator feedback
* fix a few more issues found by luac -p
* use lower case for http header key name
* more fixes based on feedback
* update lua sample
* skip auto-generated readme, doc, test files
* use tab instead of 2-space
* fix container return type
* fix cast method call
* fix cast function call
* Fix issue #6100. Tested with all the samples.
* Fix multiple issue with the examples. Removing all of this.
Adding fake endpoint .sh but it is not compiling right now.
* add rust generator (1st release)
* update based on feedback
* fix reserved keyword
* fix string parameter
* Convert String to &str in trait definition
* Only pass pathParams to uri builder
* Fixed the html escaping in return type
* Fixed the hashmap constructor
* Added models into API scope
* removed models subimport, reference from super
* update returntype in method signature
* Fixed the remaining templates inconsistencies
* Fixed issues that floated up in kubernetes swagger file
* add hash support, fix docstring
* fix map parameter, update api.mustache
* use baseName for parameter
* use fully-qualfiied model name
* add rust tests
* fix test cases
* Rust gen slightly more idiomatic (#6247)
* Go -> Rust in README
* Remove leftover go file in rust sample
* rust: Regenerate sample
* rust: Rename *Impl -> *Client
* rust: one-line use line
More in line with common style
* rust: Replace tabs (in java) with 4 spaces
* Added trivial getter implementation (#6249)
* update rust petstore samples
Fixed typo in shell script
Added support for Outer Enums, inner enums not supported.
Added missing UUID library in ecf template.
Improved Model inheritance.
This change adds Objective-C compatibility for Swift Optional scalars in the swift4 language just like we added in swift3 here:
https://github.com/swagger-api/swagger-codegen/pull/6129
It also adds unit tests for the swift4 language. Currently those unit tests are the same as the swift3 unit tests, but will change soon as we iterate on the swift4 language generator.
Currently, in the swift3 language, if you have an optional integer, number, or boolean property in a model, then the generated swift3 model class might look like:
class SomeModel {
var someInt: Int?
var someFloat: Float?
var someDouble: Double?
var someBool: Bool?
}
This works fine if you are accessing this model only from Swift code. However, it is very common for iOS codebases to contain both Swift AND Objective-C. If you need to access this model from Objective-C, then those 4 properties are not accessible, since Optional scalars do not translate to Objective-C.
Therefore, in the swift3 language, we want to add some code for Objective-C compatibility:
1. We add a "objCompatible" boolean command-line option. If objCompatible=true, then this enables some additional code generation to make these types of properties accessible from Objective-C. If objCompatible=false, then the generated code is exactly as it currently is. The default is objcCopmatible=false.
2. If objCompatible=true, then for these types of Objective-C-inaccessible properties (Optional scalars), then we add a "x-swift-optional-scalar=true" vendor extension in the CodegenProperty.
3. Then, in the model.mustache template, if we see x-swift-optional-scalar=true, then we add an additional computed property which returns an optional NSNumber.
So, for example, when objcCompatible=false (the default case), then the generated code for the "declawed" property of the Cat model looks like:
open class Cat: Animal {
public var declawed: Bool?
...
But when objcCompatible=true, then it looks like:
open class Cat: Animal {
public var declawed: Bool?
public var declawedNum: NSNumber? {
get {
return declawed.map({ return NSNumber(value: $0) })
}
}
...
* Changes to allow field names as examples for string properties and multiple items in array during example generation
* Reverting the version to 2.3.0-SNAPSHOT and autogenerated petstore files
* Add polymorphism support for python
* Update api_client
* Remove leading spaces
* Bugfix
* Catch case where swagger_types is none but get_real_child_model is defined
* Added C++ generator for Pistache
* Revert of CodegenOperation
* Updated template
* Removed isRestful from method declaration
* Updated httpMethod variable
* Changed isRestfulCreate
* Updated pistache library name
* Update pistache petstore sample with the new library name
* removed typings for typescript-node language and updated typescript version
* updated sample of typescript-node by running .\bin\windows\typescript-node.bat
* More flexible subclassing of ApiClient possible by s/private/protected/g
I found myself in a situation where I needed to change the configured `Feature`s, but
because of all the private variables I was not able to do so. Perhaps this is a bit too
broad of a stroke, but I changed all fields and methods to `protected` instead of `private`.
In this way, future extensibility should be improved.
Also, to solve my particular problem, I added a new empty method called
`performAdditionalClientConfiguration` which will allow subclasses to add specific features,
or do anything else possible with a `ClientConfig`.
* Updated samples
Allow documentation to specify void when no
return type is available
Remove Xcode warnings:
"Documentation Issue
Empty paragraph passed to '@return' command"
* Fix issue 5460
* Handling only first and last double quote to support example with double quote in the middle
* Fix proposed by @ePaul
* Add comments to explain de fixStringModel function. Add an enum model called PetStatus that test this scenario. Update sample only for JavaPlayFramework generator
* Add automatic validation of return type when beanValidation is activated
* Small fixes for the automatic validation
* Add validation of entering body object + fix problem when receiving list + do not validate when the return value is a file
commit e3210cf8cc679c54f5c0d8d4fda2db6af1ee5bcf
Author: wing328 <wing328hk@gmail.com>
Date: Sun Jul 23 17:41:44 2017 +0800
comment out failed kotlin test
commit ed6bd1b92464f56885bc3cfa5d30936ce4a3d53d
Author: wing328 <wing328hk@gmail.com>
Date: Sun Jul 23 17:17:20 2017 +0800
test kotlin the last
commit a601445d04d0935f6a80a5052f1b4c6c3ee514d2
Author: wing328 <wing328hk@gmail.com>
Date: Sun Jul 23 16:56:40 2017 +0800
add test for kotlin client
* [TypeScript][Aurelia] Create Aurelia code generator #5987
* Implement authentication methods for Aurelia #5987
* Support form data in Aurelia #5987
* Generate an index.ts file for Aurelia #5987
* Add return type to Aurelia model imports #5987
* Add Aurelia client options test #5987
Added shell scripts, batch files to generate Eiffel Petstore samples.
Added Setup CI (travis, shippable, etc) to cover the Eiffel Petstore samples.
Refactored part of the code into an Abstract Eiffel base class,
which can be later used in Eiffel server stub generators.
Added Eiffel Style guide to the contribution guidelines so that Eiffel contributors know what to follow in terms of code style
Fixed code generator issues.
Updated mustaches templates.
* Improve generated code in APIs so to use the most of Swift SDK
Improve generated code in APIHelper so to remove duplicated code and reuse existing checks
* run ./bin/swift3-petstore.sh
* Run ./bin/swift3-petstore-all.sh to update all the Petstore samples
* Restore old implementation and fix using .isEmpty in place of .count
* Run scripts to update pet store samples
* Reverte changes that use reduce
* Bug fixes on APIHelper template
* Fix build error in Xcode 9 beta 3, as .compact is no longer defined
* Add test schema for Swift 4 and associated script and config files
* Add test app for swift4Test.json schema
* Make integer, Integer, int, and Int32 types map to Swift Int type instead of Int32 type
* Add CodingKeys to model template, which allows us to serialize/deserialize variable names that are different than property names
* Make updates to Swift 4 test schema
* Fixes for unit test app for swift4Test.json Swift 4 test schema
* Major fix to the collection handling in Play Framework Generator
* Major fix to the collection handling in Play Framework Generator (small details missing from previous commit)
* Add the fix to header and form parameters too
* Fix to the default values. It did not take care of the "default" and also was setting to a bad default when not set.
* Just make a difference between string and non string instead of placing all types in the mustache file
* [Bugfix] Removed a debug print statement that sometimes caused crashes.
Change-Id: I62cf8d70faddfe855c7150927441465466dbaa53
Signed-off-by: akhilkedia94 <akhil.kedia@samsung.com>
* [Workaround/Fallback] Fix conversion of string representation of Json to JsonNode
Changed the conversion to consider any non-parseable string as a single "json string" object.
This is just a fallback to handle non-ideal server responses.
Change-Id: I5339d385e57b6225706fbaaaba1c04003c3810e9
Signed-off-by: akhilkedia94 <akhil.kedia@samsung.com>
* [Bugfix] Correct Handling of Non-String Value Types in Json Maps
Inside the Json Maps in server response, the earlier code was bugged if the "value" in the map was of a non-string type.
Change-Id: I8c34c7e9470fc0743b509917f8098b2ebe2bd4e5
Signed-off-by: Akhil <akhil.kedia@samsung.com>
* [BugFix/WorkAround] No "isPrimitiveType" in BodyParams
The "isPrimitiveType" value tells us whether the data type of a particular parameter is one if the primitive types.
This value is not present when iterating over all the body parameters, but is somehow present when
iterating over all parameters and filtering for only BodyParams.
Change-Id: I5b0a97e615b7300c33dc7f3d4673ad5e87c36f7e
Signed-off-by: Akhil <akhil.kedia@samsung.com>
* [Bugfix] Making Functions Static to Avoid Name Clashes
Multiple functions in different classes might named the same, hence leading to multiple functions of the same name.
Using static to have only internal linkage for these helper functions.
Change-Id: I97fb1dd64b176c4a2b95e6d923723469852bc85a
Signed-off-by: Akhil <akhil.kedia@samsung.com>
* [Enhancement] Minor Improvements to Documentation
Added Modules in Doxygen Doc, Improved MD documentation
Signed-off-by: Akhil Kedia <akhil.kedia@samsung.com>
* Regenrated petstore sample
Update the petstore sample with newest template files
Deleted older sample in samples/client/petstore/tizen/client/
The old samples use oblsolete APIs
(These are APIs for Tizen 2.0, removed in 2.4, current release is 3.0)
Signed-off-by: Akhil Kedia <akhil.kedia@samsung.com>
* [Bugfix] Fixes incorrect headers sent (#5980)
Regenerated the petstore as well.
Signed-off-by: Akhil Kedia <akhil.kedia@samsung.com>
* First commit of the Java Play Framework server generator. It is highly based on Spring so there might me a couple of things that don't make sense (like options or parameters) for the Play Framework.
* Fix suggestions in the PR discussion + add .bat and .sh file as requested.
* Updated Readme.md file
* Remove unused mustache file + fix baseName vs paramName in all the mustache files.
* Fix the compilation error when we have a body which is a list or map. Doesn't fix the problem with the annotation itself.
* Fix the problem with the Http.MultipartFormData.FilePart
* First iteration of updating the typescript-jquery template/generator
* first RC of the new version of Typescript-JQuery using better models.
* Minor fix to the generation
* first RC of the new version of Typescript-JQuery using better models.
* Add an options for people using this client in a legacy app and that already have jquery loaded with a script tag somewhere
* Generation of the samples based on the latest changes from the typescript-jquery generator
* Fix to the check if the value is null and undefined
* Small fix when using collection
* updated Spring, Boot, Fox and Cloud dependencies
* run scripts for java, jaxrs-cxf and spring samples (although changes are not related to my changes)
* update jersey java8 petstore samples
* update java feign samples
* update java petstore samples
* add new files for java petstore clients
* roll back spring cloud dep version
* fix jaxrs-cxf error
* Closes#5863
The "dateLibrary" option for java, sadly, sets a mustache value "java8". This change updates this so that "java" in the mustache
libraries means what it should mean - use all java8 classes. In this case, there's no need for the third party Base64 library
as java8's JDK has this built in. In my view, the "dateLibrary" should be deprecated but that should be a separate PR.
* Closes#5954
built and ran tests/samples
* updated versions
* match fix in 2.2.x branch
* updated with 73df07d64c
* regenerate pom.xml for jaxrs-cxf-petstore-server-annotated-base-path
* regenerate pom.xml for jaxrs-cxf-petstore-server-non-spring-application
* adapt the resttemplate target for the threeten Time API
* add threeten dependencies to build.gradle
* fix missing dollar sign
* fix missing dollar sign
* Do not generate pom.xml and README.md when interfaceOnly=true #5542
* New swaggerDocketConfig option, to generate Spring configuration class for Swagger Docket bean. Ignored when interfaceOnly=false or library=spring-cloud #5542
* Updated tests running ./bin/spring-all-petstore.sh
* Run ./bin/spring-all-petstore.sh
* Fix for issue #3638
* Update tests for fix for issue #3638
* Fix bug when queryParams and collectionQueryParams are both specified
* Update tests
* Add certain tests back, address CI failures
* [csharp] refactor ApiClient and Configuration usage
* # This is a combination of 2 commits.
# The first commit's message is:
[csharp] refactor ApiClient and Configuration usage
[csharp] Regenerate sample
# This is the 2nd commit message:
[csharp] Simplify setting apikey/prefix/headers
* # This is a combination of 2 commits.
# The first commit's message is:
[csharp] refactor ApiClient and Configuration usage
* Simplify setting apikey/prefix/headers
* Regenerate sample
# This is the 2nd commit message:
[csharp] Pass-through configuration timeout to client
* [csharp] refactor ApiClient and Configuration usage
* Simplify setting apikey/prefix/headers
* Regenerate sample
* [csharp] Regenerate all client samples
* [csharp] regenerate .net standard/core samples
* [csharp] Fix Timeout diff between netstandard and non-netstandard
* [csharp] Resolve additional netStandard issues after merge
* [csharp] Update doc for Configuration usage
With this change, users providing custom configuration must provide an exported Configuration factory, rather than just an object. This is needed to be Angular AoT compatible.
Example use:
import * as api from '../api';
/** Configuration settings for the backend API */
export function backendConfigurationFactory(): api.Configuration {
return new api.Configuration({basePath: '/api'});
}
@NgModule({
imports: [api.ApiModule.forConfig(backendConfigurationFactory)],
...
* Enable Tag details to be used in templates
Adds the ability to reference the tag name, description, external
docs, and vendor extensions in Mustache templates during codegen
* Properly resolve tags when not defined in Swagger tags definition
* Fix NullPointerException for info.version on Javascript client codegen
* Set/Return project default version to 1.0.0 if info.version not found
* info version null check handled and default version/appVersion value set to 1.0.0
* Removed null check for info version. Fixed DefaultGenerator code to handle null check.
* Semicolon added missing
* Rewrite of Go Client
* Revert to older version of context.Context
* Clean and bulk up concurrency test.
* Correct {{path}} to {{{path}}}
* change custom date type to string.
* Add APIKey authentication
* Correct missing line from resolving conflicts.
Correct missing line from resolving conflicts.
* reimplemented basic requests with httpplug
* added returning headers
* added query params support
* removed constant reference to model class
* some extra @throws; form params
* form and query params encoding
* file upload / form multipart
* added missing response headers in WithHttpInfo calls
* removed Store test From PetApiTest class
* removed configuration overriding test as its now task of client adapters
* updated store tests with new client initialization code
* updated composer.json template
* not using json_decode if response is string
* renamed some variables to camelCase
* removed ApiClient and Configuration classes
* added HeaderSelector template
* added ObjectSerializer injection
* regenerated all samples
* added AuthConfig and readded support for custom api keys
* readded support for oauth tokens
* readded basic auth; moved auth tests to separate test class
* readded header params
* readded support for collections in paths
* readded config option; readded exception handling
* file downloading; readded some Configuration properties removed earlier
* readded default headers
* made responses and return types work same way as earlier
* made all methods static in ObjectSerializer
* updated test.php, replaced autoload.php with composer's autoloader
* updated api doc template
* removed classes used for testing; regenerated Fake_classname_tags123Api
* replaced httplug with guzzle6
* updated required php version to 5.5
* clean up
* readded missing userAgent feature; removed default headers from Configuration
* updated test.php
* downgraded phpunit back to 4.8 to work with php5.5; fixed client initialization in some tests
* Add async support to scala client.
* Format api endpoints.
* Modify build.sbt.
* Change date format and pass StoreApis tests.
* Add StringReader and StringWriter to support string serialization/deserialization.
* update petstore samples for scala clients
* Update maven and gradle dependency. Update tests to pass compilation.
* Migrate from Swashbuckle to Swashbuckle.AspNetCore
* Fix typo
* Add SwaggerResponse for all responses
* Remove model constructor
* Add required attribute if available
* Improve whitespace and remove some redundant code
* Remove redundant code from Dockerfile
* Add disable warning 1591 pragma for model utility methods for bringing down compiler warnings to zero
* Add proper model state validation before controller is called
* Regenerate AspNetCore PetStore sample
* [Swift3] fix format warnings
* [Swift3] null enumerations should not cause failure
success or failure on numm enumerations should be decided by users
* update petstore
* handle type mismatch and null respectively
* Issue 4637 Fix for ci build (#4643)
* [Python] update python requirement.txt and use single quote for safe characters (#4702)
* update python requirement
* update petstore sample
* Implemented fix for missing json to property mapping in typescript-node
The previous version did not parse the JSON-Response at all, so that
properties, which where renamed (e. g.due to modelPropertyNaming config
option), were not correctly parsed.
E. g.: modelPropertyNaming=camelCase & property 'mounted_at' in json,
would be renamed to mountedAt in the model.
This was not parsed at all in the typescript-node client api, so that
the actual model still had the mounted_at property, but not mountedAt.
See #2766 for additional details
* Updated samples for typescript-node
* Reverted initial changes to api.mustache
* Draft for object serializer for typescript-node
* Fixed missing variable error in ObjectSerializer in typescript-node
* Fix for body return type
* Fixed attributeTypeMaps when polymorphism is used
* Added ObjectSerializer support for polymorphism
* Code formatting in typescript-node api.mustache
* Fixed primitive type bug & added tests for ts-node
- primitives were serialized as strings instead of their respective type
- added test case for pet
* Code Formatting in ts-node client test
See samples/client/petstore/typescript-node/npm/client.ts
* Replaced tabs with 4 spaces and improved code formatting
* Recreated security test for typescript-node
* Read sample.png with fs.readFileSync instead of a stream
* Merge branch 'www2k-feature/file-response'
* Merge pull request #4421 from wing328/fix_isfile_boolean
Fix `isPrimitiveType` for file property
* roll back to latest working version of swagger paresr for codegen
* enable typescript-angular2 to upload file
* update typescript-angular2 samples
* [Swift 3] Return an error when dealing with invalid responses, instead of crashing.
Compatiblity: ErrorResponse.Error becomes ErrorResponse.HttpError
* Cleanup and work around existing swift3 generator bug/missing feature
* Generate PetStore samples for swift3
* [Swift3] Make ErrorResponse a struct for cleaner useage. Specify Errors that are always ErrorResponse as ErrorResponse type to avoid casting.
* [Swift3] Regenerate Petstore after ErrorResponse changes.
* Add VSCode to the list of ignores.
* Move optional parameters into a map[string]interface{}
Refactor tests to new API and add concurrency test.
* Add optional check to postBody.
The pet-store does not create this scenario.
* [feign] add threetenbp support for feign clients
* [okhttp] add threetenbp support for okhttp clients
* [jersey] add threetenbp support for jersey clients
* [retrofit2] add threetenbp support for retrofit2 clients
* [spring] add threetenbp support for spring generators
* add a workaround in tests for a bug in the petstore
The petstore doesn't manage fractional digits of dates correctly when there are less than 3
* add configuration to typescript fetch
* fix issues reported by the CI
* fix header parameters in ts fetch client
* add new configuration file for ts fetch
* skip if check for configuration in ts fetch
* Fix `this.configuration` issue in paramsCreator
* update ts fetch samples
* Fix typescript fetch tests to work with Configuration
* Add dictionary to store apikeys (#8)
* Add dictionary to store apikeys
* Type apikey with expected params rather than Dictionary - typescript-fetch
* Update test samples to new typescript-fetch api
* Fix tests for typesript-fetch api
* update typescript sample using petstore.yaml
* Update JavaJaxRS/resteasy/api.mustache to have swagger annotations
The annotations should now appear on generated resteasy API classes.
* Re-generate resteasy petstore sample
* Add swagger-annotations to rest-easy samples as a dependency
* Regenerat pom.xml and build.gradle files for resteasy
There are several issues with the security policy:
* The security policy is created with `AFSSLPinningModeNone` which means that even if pinned certificates are set (if config.sslCaCert is not nil), they will be ignored. Pinning will not work at all with this security policy.
* The configuration wrapper for the security policy is a bad idea.
* `verifySSL` controls both invalid certificates and domain validation. A vanilla `AFSecurityPolicy` clearly exposes both `allowInvalidCertificates` and `validatesDomainName`.
* `sslCaCert` only allows for a single pinned certificate. A vanilla `AFSecurityPolicy` clearly exposes a set of pinned certificates and makes it very convenient to load them with either `+[AFSecurityPolicy policyWithPinningMode:]` or `+[AFSecurityPolicy certificatesInBundle:]`
Since the security policy does not work at all and adds confusion, it is better to just remove it and let the user configure a security policy that fits their needs.
this allows to remove a lot of code in the ApiClient.
Tests for the ApiClient thus have been move to JSONTest.
Also allow to configure the date formatter of all date types individually.
An assertion in testCreateAndGetPetAsync() is removed because it's useless and makes the test fail randomly.
See #3727
Updated Tizen Client Codegen to remove calls to obsolete/deprecated system APIs.
The new templates are based on json-glib and libcurl.
The produced code also contains scripts for auto-generation of the documentation of the produced client library using Doxygen.
Included test cases for Petstore in /samples/client/petstore/tizen/PetStoreTest/
Signed-off-by: akhilkedia94 <akhil.kedia@samsung.com>
* change api and ApiClient to return cancellable NSURLSessionTasks instead of NSNumber
* define a configuration protocol for custom configurations, which can be passed to api clients instead of a global configuration, provide a default implementation with a singleton option
* integrate a workaround for a current JSONModel concurrency bug
* update to new ISO8601 pod
* add missing call to super
* integrate new templates into codegen
* updates documentation templates
* updates petstore objc generated code
* fixes objc client tests
@@ -7,11 +7,11 @@ Also please indicate in the issue title which language/library is concerned. Eg:
<!-- describe what is the question, suggestion or issue and why this is a problem for you. -->
##### Swagger-codegen version
##### openapi-generator version
<!-- which version of swagger-codegen are you using, is it a regression? -->
<!-- which version of openapi-generator are you using, is it a regression? -->
##### Swagger declaration file content or url
##### OpenAPI declaration file content or url
<!-- if it is a bug, a json or yaml that produces it.
If you post the code inline, please wrap it with
@@ -37,7 +37,7 @@ link it here.
##### Related issues/PRs
<!-- has a similar issue/PR been reported/opened before? Please do a search in https://github.com/swagger-api/swagger-codegen/issues?utf8=%E2%9C%93&q=is%3Aissue%20 -->
<!-- has a similar issue/PR been reported/opened before? Please do a search in https://github.com/openapitools/openapi-generator/issues?utf8=%E2%9C%93&q=is%3Aissue%20 -->
- [ ] Read the [contribution guidelines](https://github.com/swagger-api/swagger-codegen/blob/master/CONTRIBUTING.md).
- [ ] Read the [contribution guidelines](https://github.com/openapitools/openapi-generator/blob/master/CONTRIBUTING.md).
- [ ] Ran the shell script under `./bin/` to update Petstore sample so that CIs can verify the change. (For instance, only need to run `./bin/{LANG}-petstore.sh` and `./bin/security/{LANG}-petstore.sh` if updating the {LANG} (e.g. php, ruby, python, etc) code generator or {LANG} client's mustache templates). Windows batch files can be found in `.\bin\windows\`.
- [ ] Filed the PR against the correct branch: master for non-breaking changes and `2.3.0` branch for breaking (non-backward compatible) changes.
- [ ] Filed the PR against the correct branch: Default: `master`.
- [ ] Copied the [technical committee](https://github.com/openapitools/openapi-generator/#62---openapi-generator-technical-committee) to review the pull request if your PR is targeting a particular programming language.
# comment out below as installation failed in travis
# Add rebar3 build tool and recent Erlang/OTP for Erlang petstore server tests.
# - Travis CI does not support rebar3 [yet](https://github.com/travis-ci/travis-ci/issues/6506#issuecomment-275189490).
# - Rely on `kerl` for [pre-compiled versions available](https://docs.travis-ci.com/user/languages/erlang#Choosing-OTP-releases-to-test-against). Rely on installation path chosen by [`travis-erlang-builder`](https://github.com/travis-ci/travis-erlang-builder/blob/e6d016b1a91ca7ecac5a5a46395bde917ea13d36/bin/compile#L18).
This spec is mainly for testing Petstore server and contains fake endpoints, models. Please do not use this for any other purpose. Special characters: \" \\
In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
## Our Standards
Examples of behavior that contributes to creating a positive environment include:
* Using welcoming and inclusive language
* Being respectful of differing viewpoints and experiences
* Gracefully accepting constructive criticism
* Focusing on what is best for the community
* Showing empathy towards other community members
Examples of unacceptable behavior by participants include:
* The use of sexualized language or imagery and unwelcome sexual attention or advances
* Trolling, insulting/derogatory comments, and personal or political attacks
* Public or private harassment
* Publishing others' private information, such as a physical or electronic address, without explicit permission
* Other conduct which could reasonably be considered inappropriate in a professional setting
## Our Responsibilities
Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
## Scope
This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
## Enforcement
Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at team@openapitools.org. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
## Attribution
This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [http://contributor-covenant.org/version/1/4][version]
- If you're not using the latest master to generate API clients or server stubs, please give it another try by pulling the latest master as the issue may have already been addressed. Ref: [Getting Started](https://github.com/swagger-api/swagger-codegen#getting-started)
- Search the [open issue](https://github.com/swagger-api/swagger-codegen/issues) and [closed issue](https://github.com/swagger-api/swagger-codegen/issues?q=is%3Aissue+is%3Aclosed) to ensure no one else has reported something similar before.
- File an [issue ticket](https://github.com/swagger-api/swagger-codegen/issues/new) by providing all the required information.
- If you're not using the latest master to generate API clients or server stubs, please give it another try by pulling the latest master as the issue may have already been addressed. Ref: [Getting Started](https://github.com/openapitools/openapi-generator#getting-started)
- Search the [open issue](https://github.com/openapitools/openapi-generator/issues) and [closed issue](https://github.com/openapitools/openapi-generator/issues?q=is%3Aissue+is%3Aclosed) to ensure no one else has reported something similar before.
- File an [issue ticket](https://github.com/openapitools/openapi-generator/issues/new) by providing all the required information.
- Test with the latest master by building the JAR locally to see if the issue has already been addressed.
- You can also make a suggestion or ask a question by opening an "issue".
## Before submitting a PR
- Search the [open issue](https://github.com/swagger-api/swagger-codegen/issues) to ensure no one else has reported something similar and no one is actively working on similar proposed change.
- If no one has suggested something similar, open an ["issue"](https://github.com/swagger-api/swagger-codegen/issues) with your suggestion to gather feedback from the community.
- Search the [open issue](https://github.com/openapitools/openapi-generator/issues) to ensure no one else has reported something similar and no one is actively working on similar proposed change.
- If no one has suggested something similar, open an ["issue"](https://github.com/openapitools/openapi-generator/issues) with your suggestion to gather feedback from the community.
- It's recommended to **create a new git branch** for the change so that the merge commit message looks nicer in the commit history.
## How to contribute
@@ -20,41 +20,48 @@
If you're new to git, you may find the following FAQs useful:
All the code generators can be found in [modules/swagger-codegen/src/main/java/io/swagger/codegen/languages](https://github.com/swagger-api/swagger-codegen/tree/master/modules/swagger-codegen/src/main/java/io/swagger/codegen/languages)
All the code generators can be found in [modules/openapi-generator/src/main/java/org/openapitools/codegen/languages](https://github.com/openapitools/openapi-generator/tree/master/modules/openapi-generator/src/main/java/org/openapitools/codegen/languages)
### Templates
All the templates ([mustache](https://mustache.github.io/)) can be found in [modules/swagger-codegen/src/main/resources](https://github.com/swagger-api/swagger-codegen/tree/master/modules/swagger-codegen/src/main/resources).
All the templates ([mustache](https://mustache.github.io/)) can be found in [modules/openapi-generator/src/main/resources](https://github.com/openapitools/openapi-generator/tree/master/modules/openapi-generator/src/main/resources).
For a list of variables available in the template, please refer to this [page](https://github.com/swagger-api/swagger-codegen/wiki/Mustache-Template-Variables)
For a list of variables available in the template, please refer to this [page](https://github.com/openapitools/openapi-generator/wiki/Mustache-Template-Variables)
### Style guide
Code change should conform to the programming style guide of the respective languages:
@@ -64,19 +71,19 @@ You may find the current code base not 100% conform to the coding style and we w
For [Vendor Extensions](https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#vendorExtensions), please follow the naming convention below:
- For general vendor extension, use lower case and hyphen. e.g. `x-is-unique`, `x-content-type`
- For language-specified vendor extension, put it in the form of `x-{lang}-{extension-name}`. e.g. `x-objc-operation-id`, `x-java-feign-retry-limit`
- For a list of existing vendor extensions in use, please refer to https://github.com/swagger-api/swagger-codegen/wiki/Vendor-Extensions. If you've added new vendor extensions as part of your PR, please update the wiki page.
- For a list of existing vendor extensions in use, please refer to https://github.com/openapitools/openapi-generator/wiki/Vendor-Extensions. If you've added new vendor extensions as part of your PR, please update the wiki page.
### Testing
To add test cases (optional) covering the change in the code generator, please refer to [modules/swagger-codegen/src/test/java/io/swagger/codegen](https://github.com/swagger-api/swagger-codegen/tree/master/modules/swagger-codegen/src/test/java/io/swagger/codegen)
To add test cases (optional) covering the change in the code generator, please refer to [modules/openapi-generator/src/test/java/org/openapitools/codegen](https://github.com/openapitools/openapi-generator/tree/master/modules/openapi-generator/src/test/java/org/openapitools/codegen)
To test the templates, please perform the following:
- Update the [Petstore](http://petstore.swagger.io/) sample by running the shell script under `bin` folder. For example, run `./bin/ruby-petstore.sh` to update the Ruby PetStore API client under [`samples/client/petstore/ruby`](https://github.com/swagger-api/swagger-codegen/tree/master/samples/client/petstore/ruby) For Windows, the batch files can be found under `bin\windows` folder. (If you find that there are new files generated or unexpected changes as a result of the update, that's not unusual as the test cases are added to the OpenAPI/Swagger spec from time to time. If you've questions or concerns, please open a ticket to start a discussion)
- Update the Petstore sample by running the shell script under `bin` folder. For example, run `./bin/ruby-petstore.sh` to update the Ruby PetStore API client under [`samples/client/petstore/ruby`](https://github.com/openapitools/openapi-generator/tree/master/samples/client/petstore/ruby) For Windows, the batch files can be found under `bin\windows` folder. (If you find that there are new files generated or unexpected changes as a result of the update, that's not unusual as the test cases are added to the OpenAPI spec from time to time. If you've questions or concerns, please open a ticket to start a discussion)
- Run the tests in the sample folder, e.g. in `samples/client/petstore/ruby`, run `mvn integration-test -rf :RubyPetstoreClientTests`. (some languages may not contain unit testing for Petstore and we're looking for contribution from the community to implement those tests)
To start the CI tests, you can run `mvn verify -Psamples` (assuming you've all the required tools installed to run tests for different languages) or you can leverage http://travis-ci.org to run the CI tests by adding your own Swagger-Codegen repository.
To start the CI tests, you can run `mvn verify -Psamples` (assuming you've all the required tools installed to run tests for different languages) or you can leverage http://travis-ci.org to run the CI tests by adding your own openapi-generator repository.
### Tips
- Smaller changes are easier to review
@@ -84,6 +91,7 @@ To start the CI tests, you can run `mvn verify -Psamples` (assuming you've all t
- Add test case(s) to cover the change
- Document the fix in the code to make the code more readable
- Make sure test cases passed after the change (one way is to leverage https://travis-ci.org/ to run the CI tests)
- File a PR with meaningful title, description and commit messages. A good example is [PR-3306](https://github.com/swagger-api/swagger-codegen/pull/3306)
- File a PR with meaningful title, description and commit messages.
- Recommended git settings
-`git config --global core.autocrlf input` to tell Git convert CRLF to LF on commit but not the other way around
- To close an issue (e.g. issue 1542) automatically after a PR is merged, use keywords "fix", "close", "resolve" in the PR description, e.g. `fix #1542`. (Ref: [closing issues using keywords](https://help.github.com/articles/closing-issues-using-keywords/))
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
