forked from loafle/openapi-generator-original
c5a0374d2b
* [Ruby] Use Ruby autoload to lower memory usage and load times Fixes #12648 Requiring all models up front can be very expensive in both time and memory if there are many models. In an example client with 6000 models, this would consume nearly 400MB of memory and take about 7 seconds to load. This is mostly unnecessary as most users of the client library will only actually use a small percentage of the library. The changes in this commit use Ruby's autoload capability to defer the loading until the constant is actually used. In that same example client with 6000 models, when initially requiring the library, the memory usage dropped to ~20MB and loaded in 0.3 seconds. As the constants are loaded on-demand, the memory would increase towards that 400MB ceiling, but if only a few constants are actually used, then memory will never actually hit that ceiling. An additional side effect of using Ruby's autoload is that the order of declaring the constants is not important, as Ruby will naturally load them in the correct order when they are needed. Thus, this commit obviates PR #9103 and fixes #4690. * add option to use autoload in ruby client * test ruby clients only * add tests * update samples * Revert "test ruby clients only" This reverts commit 0aaf71cd4cc5d266f824b261a4d312f07bd589e5. * update doc Co-authored-by: Jason Frey <fryguy9@gmail.com>
112 lines
4.7 KiB
Ruby
112 lines
4.7 KiB
Ruby
=begin
|
|
#OpenAPI Petstore
|
|
|
|
#This spec is mainly for testing Petstore server and contains fake endpoints, models. Please do not use this for any other purpose. Special characters: \" \\
|
|
|
|
The version of the OpenAPI document: 1.0.0
|
|
|
|
Generated by: https://openapi-generator.tech
|
|
OpenAPI Generator version: 6.1.0-SNAPSHOT
|
|
|
|
=end
|
|
|
|
# load the gem
|
|
require 'petstore'
|
|
|
|
# The following was generated by the `rspec --init` command. Conventionally, all
|
|
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
|
|
# The generated `.rspec` file contains `--require spec_helper` which will cause
|
|
# this file to always be loaded, without a need to explicitly require it in any
|
|
# files.
|
|
#
|
|
# Given that it is always loaded, you are encouraged to keep this file as
|
|
# light-weight as possible. Requiring heavyweight dependencies from this file
|
|
# will add to the boot time of your test suite on EVERY test run, even for an
|
|
# individual file that may not need all of that loaded. Instead, consider making
|
|
# a separate helper file that requires the additional dependencies and performs
|
|
# the additional setup, and require it from the spec files that actually need
|
|
# it.
|
|
#
|
|
# The `.rspec` file also contains a few flags that are not defaults but that
|
|
# users commonly want.
|
|
#
|
|
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
|
|
RSpec.configure do |config|
|
|
# rspec-expectations config goes here. You can use an alternate
|
|
# assertion/expectation library such as wrong or the stdlib/minitest
|
|
# assertions if you prefer.
|
|
config.expect_with :rspec do |expectations|
|
|
# This option will default to `true` in RSpec 4. It makes the `description`
|
|
# and `failure_message` of custom matchers include text for helper methods
|
|
# defined using `chain`, e.g.:
|
|
# be_bigger_than(2).and_smaller_than(4).description
|
|
# # => "be bigger than 2 and smaller than 4"
|
|
# ...rather than:
|
|
# # => "be bigger than 2"
|
|
expectations.include_chain_clauses_in_custom_matcher_descriptions = true
|
|
end
|
|
|
|
# rspec-mocks config goes here. You can use an alternate test double
|
|
# library (such as bogus or mocha) by changing the `mock_with` option here.
|
|
config.mock_with :rspec do |mocks|
|
|
# Prevents you from mocking or stubbing a method that does not exist on
|
|
# a real object. This is generally recommended, and will default to
|
|
# `true` in RSpec 4.
|
|
mocks.verify_partial_doubles = true
|
|
end
|
|
|
|
# The settings below are suggested to provide a good initial experience
|
|
# with RSpec, but feel free to customize to your heart's content.
|
|
=begin
|
|
# These two settings work together to allow you to limit a spec run
|
|
# to individual examples or groups you care about by tagging them with
|
|
# `:focus` metadata. When nothing is tagged with `:focus`, all examples
|
|
# get run.
|
|
config.filter_run :focus
|
|
config.run_all_when_everything_filtered = true
|
|
|
|
# Allows RSpec to persist some state between runs in order to support
|
|
# the `--only-failures` and `--next-failure` CLI options. We recommend
|
|
# you configure your source control system to ignore this file.
|
|
config.example_status_persistence_file_path = "spec/examples.txt"
|
|
|
|
# Limits the available syntax to the non-monkey patched syntax that is
|
|
# recommended. For more details, see:
|
|
# - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
|
|
# - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
|
|
# - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
|
|
config.disable_monkey_patching!
|
|
|
|
# This setting enables warnings. It's recommended, but in some cases may
|
|
# be too noisy due to issues in dependencies.
|
|
config.warnings = true
|
|
|
|
# Many RSpec users commonly either run the entire suite or an individual
|
|
# file, and it's useful to allow more verbose output when running an
|
|
# individual spec file.
|
|
if config.files_to_run.one?
|
|
# Use the documentation formatter for detailed output,
|
|
# unless a formatter has already been configured
|
|
# (e.g. via a command-line flag).
|
|
config.default_formatter = 'doc'
|
|
end
|
|
|
|
# Print the 10 slowest examples and example groups at the
|
|
# end of the spec run, to help surface which specs are running
|
|
# particularly slow.
|
|
config.profile_examples = 10
|
|
|
|
# Run specs in random order to surface order dependencies. If you find an
|
|
# order dependency and want to debug it, you can fix the order by providing
|
|
# the seed, which is printed after each run.
|
|
# --seed 1234
|
|
config.order = :random
|
|
|
|
# Seed global randomization in this process using the `--seed` CLI option.
|
|
# Setting this allows you to use `--seed` to deterministically reproduce
|
|
# test failures related to randomization by passing the same `--seed` value
|
|
# as the one that triggered the failure.
|
|
Kernel.srand config.seed
|
|
=end
|
|
end
|